20 Most Recent
Kyocera Mita Km 3035, 4035, 5035 Fs9120dn, Fs9520dn - Page 4 Questions & Answers
HOW DO YOU CLEAR ERROR CODE C5300 IN A KYOCERA 5050 MACHINE
You can try resetting the fuser error code by performing the procedure below:
On the copier type - 10871087 (may have to be in the job status menu first)
Once in MA mode type in - 163
Start
Execute
Start
You should then either cycle the power or the machine will cycle for you.
If this does not work you will need a new cleaning lamp for your fusing unit.
Kyocera 250ci making grinding noise
First you have to check the counters to see how many pages were printed or copyed. It may be a problem with some of the color drum units. At this model you need to change the units near to 100.000 A4 prints with 5% coverage. If the coverage is greater, then you'll need to change them sooner. There might be another cause for the sound, like the Transfer Belt Unit. This unit has a "waste toner path" that might be jamed. The unit is not able to get rid of this waste toner and some gears produce that noise. The transfer belt unit is working separatly for black prints and color print. You will have to remove the Transfer Belt Unit and clean the toner path with a vaccum cleaner.
Have a kyocera 2560 tried to replace the touch screen and there is nothing to see at the display could you please reply with advise?
Hi
Not being an engineer, I can't be specific about your problem, but you can get a full service manual for your machine relatively cheaply here:
Kyocera Mita KM2560 Service manual Parts Repair manual download
A description of the contents is given on this page and I also give it below:
"Service manual in English: maintenance, repair, troubleshooting, error codes, service mode, adjustment
Parts catalog: parts list, parts numbers, exploded diagrams
Service bulletin: Supplement manual, updates
Firmware"
Hope this is helpful, if so would you please register that with Fixya
Cheers
How to solve half sheet print in kyosera km3035
This problem can be caused by many reasons :-
1) Drum unit malfunctioning.
2) Developer unit malfunctioning.
3) Drum unit not getting proper electrical contacts located on the backside of the machine.
Firmware fs-1000+
Hi
Please see the FTP site for Kyocera Printer & Copiers (Service Manuals/Part List/Firmwares/ Training topics/etc
ftp://ftp.kdhk.hk
Login name: DCTC10045
Password : dealer1087
Why-print-comes-all-black-all-over-paper/
Check the scanning lamp, when copying see if the scanning is not working,,it should be turn on when copying, if yes, then replace the scanning lamp, or drum unit, drum unit have certain life span or copying yield about 100 to 300 thousand copies produces. Check your counter reader in your machine. If yes, then replace drum unit, hope it help.....
My kyocera KM 1815 keeps saying "paper jam 00 open left cover and remove paper jam but there is no jam
Hi
Check all the paper movement from the tray, left or right cover, front cover, if so then remove jammed paper. Otherwise the paper sensor spring guide missing or fell off from its original position. Check carefully where the sensor locate. paper sensors detect all the paper movement in the machine during copying or printing, so locate the place in the machine which the paper usually jammed, see the screen of the machine, it will locate the place where the paper jammed mostly. Sensor not return to it original position that is why ( remove paper jam keeps blinking)
Not finding what you are looking for?