ViewSonic N2060w 20 in. LCD Television - Answered Questions & Fixed issues
Retuning ViewSonic N2060W
This set only supports Analog transmission. Digital transmission is not supported.You need a seperate Set Top Box to solve your problem.
How do I get the volume to work on my sky remote control?
I've just done this, guided by SKY but all you really need to do it....
Press Interactive button on remote
Choose option 5
Then choose set remote control, it should give you instructions and the correct cde fo ryou specifc tv
Good luck
x
I have a Viewsonic N2060w-1M TV but I don't have a
For the remote
codes, Viewsonic does not have any since the universal remote comes
furnished with a code book from the "MAKER" of that Universal Remote. I
have heard that the Philips TV brand codes for universal remotes work on
quite a few series' of Viewsonic TV's, so try those from your code
book.
Grey blotches on screen
sounds like your pixels are dying, there's really not much to doo other than have professionals looking at it.
Sky code
please follow the steps below:
TV
RED + SELECT (flashes twice)
TV
0093
try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.
cheers
Little Dish Fitter
Sky code
Sky remote codes: 0805 1783 1785.
Here are some other codes that may work with the Viewsonic: 1295 1694 1697 1800
Power lock enable
To get rid of the power button enable you need to either press and hold the power button on the tv ( not on the remote control pad) for approx 15 seconds or if that does not work do the same using the source button
Ps3 trouble
ok, i got it working...
Ok...your problem is probably that when you're using it on the HDTV...you have the resolution set to an HD one (720p, 1080i, 1080P). A normal TV cannot display these. While it's connected to the HDTV,Before you connect it to your normal tv, you have to switch it back to 480i or 480p otherwise, your regular tv wont show a picture. So go to settings, display settings, and uncheck 720p, 1080i, 1080p. It will ask you if these are the settings you choose (and it's going to look funny on your HDTV) Accept the settings and turn it off. When you connect it to your Regular TV, you should now see a picture. Hope this helps!
Goodmans 295NS
Hi.
Try this,
It involves finding your make & model number from Sky.
Press INTERACTIVE BUTTON., then SKY CUSTOMER SERVICES,
then TECHNICAL ASSISTANCE, FOR ALL SKY REMOTES.
Now follow the on screen instructions.
http://dysonmanuals.inc.io/Chris.
Why is my vizio tv's picture black and white?
it could be your flux capacitor is out. you might need to plug it in goto menus and check to see if ur runnin 21 gigawatts if not leave it plugged in and off for two days and it should refresh it
12/29/2022 9:16:23 AM •
ViewSonic...
•
Answered
on Dec 29, 2022
•
27,119 views
Not finding what you are looking for?