20 Most Recent
HP PL4260N 42 in. Plasma HDTV - Page 2 Questions & Answers
Service manual
Service manual is in PDF, and cannot uploaded by this window. If you wish to get some details,
check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic
/ Time slide, can be selected by the drop-down list, at the top left
of the display window, will make surf easy. You can also do a search, by type in the brand name/model
number/IC used, in the search box at the top right of the display window.
Picture but no sound
Check whether the Mute funcition is ON or Off. If it is ON, make it OFF. If it is OFF, and still you do not get sound output,. there is something wrong with either its audio output circuit, or speaker. If you wish to get more details about how to check these, try this link.
http://electronicshelponline.blogspot.com/
Pull up previous posts by its left sidebar, or
type in the
brand name and model number to of your set, to its
search box, and press '
Enter' or view it in
Mosaic /
Timeslide option.
My HP Plasma is about
Hello,
this will reset all settings with TV in standby press INFO / MENU / MUTE / STANDBY on remote the TV will come on with a menu DO NOT CHANGE ANY OTHER SETTINGS only use down navigation key to move to were it displays reset then press RIGHT NAVIGATION key the TV will reset press standby to exit menu and then retune TV.
but if otherwise Tries websites like Shopjimmy.com,Ebay.com to buy parts for the replacement.
Hope this work
Picture just went out on my tv but I still have sound
I have the same problem with my HP PL4260N 42" Plasma HDTV serial # CNH6141988, model # CPTOH-0602. I have perfect sound and can change channels still with sound but NO PICTURE. I am a consumer with a question that need the advise of an expert.
No sound when connecting dvd player with HDMI cable
HDMI is prone to audio issues---it does not for example like being connected at either end with the units powered up and or on.Try disconnection of power to both units for a short time--do it with the HDMI disconnected. Then connect HDMI back at both ends and power the units on----it cannot hurt and it may help.The other alternatives are the HDMI in the set is acting up or even bad---If the player has Component outputs try going that way to the set---I have never been able to see a difference in picture or sound quality from component to HDMI.The only advantage it has is less cables in my view.
Pl4272n power but no picture
Visit the site named 'Electro-help' for more
details. Click this link. View it in
"Timeslide" or "Flipcard" option, which can be selected
from the drop down box menu by the [Sidebar] tag, at the top left corner
of the display window. It will make
search easy. There are more than 1100 posts to different brand TVs now. Pull up
older posts there.
Toshiba Plasma TV HP 42 Inch pop no pict
Most common issue is power supply board fails--Plasma sets do not sell single parts--only a complete board---may need a tech or shop to look and determine what is wrong.I can suggest things but need to know your skill levels--this is not for everyone....
No picture
A visual inspection inside the set may show what popped or not---if you are able to do that also on the power board look at all of the filter caps.
Replaceboard
I just fixed the same model with a black screen and a Y sus board fixed it.
HP speaker
The screws are little fatties,
they measure 3/inch in height and 1/4 inch in diameter...
just measured them for you!!!
hope this helps!!
Not finding what you are looking for?