Top 20 HP PL5060N 50 in. Plasma HDTV Questions & Answers


hi it sounds like your plasma has gone in stand by mode look on youtube will tell you all about stand by type in how to fix and tv make model stuck in stand by more than likely capacitors blown if your not any good soldering boards id phone tv guy out but if you are then youtube it hope this hopes

HP PL5060N 50... | 287 views | 0 helpful votes


Do a reset to this TV, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts.
https://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

HP PL5060N 50... | 140 views | 0 helpful votes


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/

To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

HP PL5060N 50... | 32 views | 0 helpful votes


Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement.

HP PL5060N 50... | 77 views | 0 helpful votes


Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
In some models of LCD TVS; the backlight inverter and its T'Con board will be a part of the panel itself, and will be a built-in type inside the LCD panel. If so, they can't be replaced. In this case; a panel replacement is the only repair. For some other models, the backlight inverter section circuit will be a part of the main power supply regulator [SMPS]. To such sets, the power supply section circuit too should trouble shoot. Contact any service technician. The circuit will differ with models and versions.
Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

HP PL5060N 50... | 56 views | 0 helpful votes


That's a pretty broad question. Is it the cable, is it the female end on the back of the tv? If it's on the tv side of things then you'll need to open up the tv and check connections to the HDMI port. If all is good, replacing just the port is an option. It should have a part # on it if you want to be certain it has the same connection to your tv. I suspect they're almost all the same, I've only seen a few from a couple tv brands.

HP PL5060N 50... | 60 views | 0 helpful votes


The TV needs professional service or replacement.

HP PL5060N 50... | 62 views | 0 helpful votes


There should be any short circuit to any of the circuit boards inside it. Check and locate the board first. Being a plasma display, the circuit will be quiet complicated to an experienced person to work on. If you wish to get some details, check the site linked here. Pull up older posts.

HP PL5060N 50... | 22 views | 0 helpful votes


you probably messed with the contrast settings. try restoring them to default.

HP PL5060N 50... | 53 views | 0 helpful votes


eo6 on screen

HP PL5060N 50... | 51 views | 0 helpful votes


Y-Sustain should be suspected. Make sure before replace it. If you wish to get more details, check the site linked below. Pull up older posts there. Check the site with patience, as it has over 2400 posts now. All are related to electronic equipment repair help. If you search the site in Timeslide option, which can be selected from the drop down list at the top left of the display window, it will be easy to locate the related post. You can also do a search by type in the brand name to your device into its search box at the top right of display window.http://electronicshelponline.blogspot.com/

HP PL5060N 50... | 82 views | 0 helpful votes


The symptom you describe indicates the internal power supply is failing

HP PL5060N 50... | 51 views | 0 helpful votes


I have a seven year Plasma TV HP PL5060. When I turn on the TV, I have sound but no picture, the screen display (power on) is a snowy blue screen and vertical pink stripe. What is causing this problem and how can I fix it cheap. I can afford a TV repair man at this time, because I am laid off from work. Thanks.

HP PL5060N 50... | 301 views | 0 helpful votes


If the set has a input or source button on the outside or side it can be got at and removed (not the plastic button but the switch under it) they do fail in this way and with it removed and the issue gone you can use the remote instead.

HP PL5060N 50... | 250 views | 2 helpful votes


I had this problem for weeks before giving up. I just had another go and i resolved this by downloading my gpu driver but not installing, then i un-installed my mobo hd sound driver and my gpu hd sound driver. Then i installed the latest nvidia driver from my hard drive. When the driver activated i got some buzzing for 10 secs and then presto (hd sound) via HDMI. However my pc tells me still "no audio capable display". computers are often wrong.

HP PL5060N 50... | 78 views | 0 helpful votes


are you looking for a power supply board for this model?.

HP PL5060N 50... | 78 views | 1 helpful votes


Visit the site named 'Electro-help' for more details. Check this link and select the site named above. View it in 'Flip card' option, which can be selected from the drop down box menu by the [Sidebar] tag, at the left top left corner of the display window. It will make search easy. Some times, the ads attached with each posts both at the right and bottom, might help you to find the availability of spare parts. There are more than 640 posts to different brand TVs now. Will be updated daily.

HP PL5060N 50... | 78 views | 0 helpful votes


I would say it is power supply related. Consult a Technician.

HP PL5060N 50... | 89 views | 0 helpful votes


Just replace the y sustain board

HP PL5060N 50... | 146 views | 0 helpful votes

Not finding what you are looking for?
HP PL5060N 50 in. Plasma HDTV Logo

104 questions posted

Ask a Question

Usually answered in minutes!

Top HP Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Edward Easley
Edward Easley

Level 2 Expert

97 Answers

Are you a HP Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Televison & Video

  • HP Televison & Video

Most Popular Question

hp pl5060n inputs problems

  • Televison & Video
Loading...