Top 20
Evenflo Jenny Lind Crib Questions & Answers
Replacement parts
Your crib date is old enough to be off the market. This would be a 20 year old crib, and they do not meet any of the safety standards set of use at all. . Sorry. I had this same Jenny Lind Crib.
I was given a Nod-a-Way
I have a nod a way and just gave it to a friend the style was Okla Homer Smith and the manufacter was Dorel Juvenile. My bed was made in 97, Jenny lind style hope this helps.
Where can I buy parts
If you have the model number usually on the bottom of the crib, if it is
one of the Jenny Lind make you will need to know the date it was made
that is on the same spot. You may find it in Jenny Lind, but it depends if the crib is still
replaceable or not. It all depends on their product replacement parts
policy.
Keep in mind that "Jenny Lind" is actually a style name
used by several different manufacturers. Although we can service most
of the U.S. made cribs and cradles, it is very helpful to know who
originally made the crib or cradle. "Jenny Lind" is not a manufacturer.
Check in this links:
- safety.evenflo.com/cs/sc/cssc99_RD (for contact)
- evenflo.com/replacement_parts (search right model and manufactured date).
Hope this helps.
I have a delta crib
Hi earlyriser37,
You have two options where you can get replacement parts for your Jenny Lind crib:
1. You may write or call this company:
Simmons Juvenile Products Company
P.O. Box 287
613 East Beacon Avenue
New London, WI 54961
(920) 982-2140 ext 296
2. Or call Products America at 1-800-205-9642 or check their website at
www.productsamerica.com. They have the Jenny Lind by Evenflo crib parts.
Hope this helps.
Thank you for using FixYa.
I am looking for assembly
You can call Products America at 800-205-9642 or 800-772-1041. We offer a wide verity of hardware and instructions for many cribs.
Need instructions to put together
You can call Products America at 800-205-9642 or 800-772-1041. We offer a wide verity of hardware and instructions for many cribs. Our qualified customer service staff is standing by to help you with proper selection, pricing and ordering information. We are open M-F 8am to 6pm CST. We look forward to speaking with you!
Nelson crib model number 112104 assembly
You will not find instructions for this crib. The company is out of business. It is pretty straight
forward design wise. Either a nub holds the top of the fixed side and a bolt holds the two bottom ends
or all 4 have bolts. The spring/mattress support goes in next and the dropside uses two steel rods
the are about 2 feet long and they go vertical down each headboard down to the L braces at bottom. They feed through the dropside and a sprin goes under the dropside wood to keep it from slamming down
on the L brace. 2 screws hold the rods in place. If you have a specific problem post it and I will try and help you through.
I dont have instruccions for assembly for my crib
Good day to you!!!
I did all that I can to search what you are looking for but unfortunately I couldn't find it...
so I am suggesting you to inform the company/market you bought the crib.
In this you can get the instruction free..
I honestly don't think this suggetion helps you but still I am trying to give you Ideas what to do...You have all the right not to pay me for this suggestion...but I am still hoping that it helps you...
Thank you...
Need directions on how to
- Unfortunately Gerry model#1921 is not a valid Model (1921) that is. All Gerry model cribs have a CPSC federal mandated recall on them. You can read more here. http://safety.evenflo.com/cs/sc/cssc99_RD.phtml?rid=EFR2&src=WEB Because these small wood cribs have been recalled I recommend contacting them from the link provided and inquire about a replacement of hardware etc to make it safe for your baby. The reports are, with injuries, of the mattress falling clear through and injuring the children laying in the crib.
- The cribs were made by Evenflow and sold under the name of Gerry and some under the name Even flow so the model number can be confusion. The link I provide has the entire explanation and all their contact information. This is why no manual can be found for #1911, because that model does not exist.
Regards,
Tony
Not finding what you are looking for?