20 Most Recent Epson Stylus CX6000 All-In-One InkJet Printer - Page 2 Questions & Answers

Hi!
Maybe waste ink counter needs to be reset.
Download the resetter from the link below and follow the instructions carefully.
Download Here:
http://tricks-collections.com/download-link-resetter-epson-t11-t30-t33-t50-t60/
Reset and Reboot

Hi, please check if there is any foreign objects that was stuck when it try to grabs mulitple pages. Then power cycle your printer. Make sure also that the left edge guide or platen lever is seated correctly as the paper is loaded perfectly in the feeder and try printing. If issue still present it only means that the sensor that responsible in grabing papers in the paper feeding section is damage or the mechanism that holds the paper was get damage when the printer feed multiple paper at the same time. You may need to call the printer manufacturer and ask for service.

Tirzo

Could be the waste ink tank is full. Take a look in at www.fixyourownprinter.com. Aslso a useful download is the SSC Epson utility that carries out many 'managment' functioms and has its own forum also www.ssclg.com And last but not least - Epson customer support

We took ours to a local repairer who used a special program to blast the heads. We had tried head cleaning ourselves and this didnt work. It has had to go back two or three times but it does work for several week after.

Hi Chris,Thanks for contacting FixYa.If you do not have the installation disc, you can download the software from manufacturer's support website by clicking this link On the page which opens, select the operating system of your computer from the drop-down menu.Then download and install the required drivers and software. Please note: The list of available software and drivers will load only after selecting the operating system of the computer. Hope this solves your problem. Thanks again.

fuse only blows when there is a short circuit ahead. you need to check the bridge rectifier, main capacitor, main switching device, and associated parts for short circuit with the help of a resistence meter. only after replacing the bad part with good one, you should replace the fuse with same rating.

To correct my E-90 error I opened the lid and saw that there was a torn piece of paper under the carriage which jammed the carriage so it could not move. Two minutes later, after I moved the carriage by hand and removed the paper jam, I powered off and back on and I'm back in operation. Thanks to all before me who suggested it might be user fixable.

Hi,
To clean your Epson Stylus > open a document (from the computer) and select print from the menu,
- In the print screen window select 'properties' Or 'Preferences'

- In the next window click 'maintenance'

- In the next window there will be many options to clean, align, nozzle check etc etc...
This will solve the paper jamming problem. Hope this helps, please rate if the solution was helpful, thanks!

It seems that some times your print spooler service stops working, just go services in administrative tool in control panel of your system and make sure that print spooler service is running,if you find it running then restart it one, if this does not work then I would suggest to reinstall the printer drivers.

you probably need to re-install your printer software pop your intall cd in and follow the prompts to install your printer
or go to epson.com
http://www.epson.ca/cgi-bin/ceStore/support/supDetail.jsp?BV_UseBVCookie=yes&oid=72303&infoType=Overview

Hello qmgoodyhere is the processus to restore your printer
Right click on the small printer icon in the bottom-right corner of your desktop and scroll up to Printer Settings. now on the Main tab. Click the Reset Defaults button. Click OK.
Now clic Start button of your desktop. Scroll up and click Programs" ChooseEpson Scan and then click Epson Scan. Click the drop-down menu in the top-right corner of the window that appears. Choose "Professional Mode." Hit the "Reset" button that appears. Click the "OK" button

click here for download software

Yeppers, there is a SMALL object in there. If you have an air can, that is the best option to clear even things we do NOT want to clean up after they come out, but it is needed. If that does not work, you can use a combo of Q-tip and rubbing alcohol, or vodka and stick it in there and wipe hard to see if you can clear anything. Also, you can tip the printer towards you, holding tight and lightly whack the back to help dislodge the item. Also, you can try a piece of poster board paper to jam in there to get the piece out... PLEASE let me know if these do not work, we can try a few more things... Thanks for letting me assist you today, is is my pleasure.... Guy