20 Most Recent Westinghouse LTV32W6HD 32 in. LCD Television - Page 6 Questions & Answers

manual operating source select switch problem

mainboard defective contact service personnal

check with manufacturer tech support or google manual or specs

go into set up see if on demo or store use change to home if same then bad control board

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ https://homehol.blogspot.com/

Check the remote control for its infra-red emission. Check it with fresh batteries. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.

You can try attaching an antenna to the tv and waiting to see if the autoscan finally terminates as the TV in present condition is searching for channels it can not detect. But several things are compounding your difficulty. You do not appear to have model number, remote control, or user guide. Knowledge of the model number would help with identification of the controls on the TV and without that, you are unlikely to get much in the way of assistance. You or an assistant would track down the user guide which is sometimes at the manufacturer's site and other times further afield. If attachment of an antenna did not stop the autoscan cycle, you would likely seek the procedure to return the TV to its "defalut" state. The manual may or may not help with that but it is a starting place. Acquisition of the model number accompanyed by the brand name and the word remote could get you to a site that sold either a universal remote or better yet the original. With the original remote and a user manual, you have better proscpects of working your way through menus. Is it safe to assume you have seen chromecast on this TV before all cabling and remotes vanished. Some Westinghouse TVs only have a power button which is a good reason to supply a model number. If there are more buttons affecting input , you might be able to get the TV to the mode where it accepts Chromecast. But if attachment of the antenna does not after a time stop the autosearch scan and any attempt to restore the tv to "default" has failed, you may have a motherboard problem. Your journey and further assistance from someone will begin with you acquiring the model number which in on the set somewhere. But there is nothing wrong with making a quick fix attempt by attaching a TV cable. If that stops the cycle and there are other control buttons affecting input, you might just stumble into a fix. If you post again, be sure to supply that model number and brand.

enter code search and search for the proper code

make sure HDMI you are using is highlighted in input or source then make sure you have wifi

check input or setting see if that HDMI selected

0000 8899

Could a button be stuck on the remote, maybe the Menu button?

We need to know the model number of the television. You need to know that if the colors are way out of range that the problem cannot be remedied with an adjustment.

https://codesforuniversalremotes.com/remote-control-codes-for-westinghouse-tvs/ Directions to get remote codes to work on Westinghouse TVs:

1. TV.
2. Press and hold MUTE & SELECT for two blinks.
3. Enter 9 9 1, wait two blinks.
4. Enter 1.
5. Press and release VOL UP.
6. Point the remote at the TV and keep pressing and releasing the CH UP key, if and when the volume changes.
7. Press select to lock in code.

notify the repair person of problem and have them correct

If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box. http://electro-medical.blogspot.com/ http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/ http://electronicshelponline.blogspot.com/

check the power fuse

After reading blog topic's related post now I feel my research is almost completed. happy to see that. Thanks to share this brilliant matter. <a href="https://digitalsaad.us/">NYC Web Designer</a>

It doesn't have that code in its library.

whats the tv make & model?