Westinghouse LTV32W6HD 32 in. LCD Television - Answered Questions & Fixed issues
I HAVE THIS TV AND
The tv have three colors guns Green,Red,Blue.Pink pictures mean there no blue color.Take another tv tries that incomming broadcasting signal cable,see if u getting all three right colors for that tv?Yes,than that tv have a pink pictures have a dead Tuner signal board,no than u have a bad incomming broadcasting signal cable or pay cable box.If it the tv Tuner signal board.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish Tuner signal board for the replacement.
9/2/2014 12:50:24 AM •
Westinghouse...
•
Answered
on Sep 02, 2014
•
651 views
How can i fix this tv ?
Backlight problem. Check and replace damaged component/s at its backlight inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Viewing it in "
Mosaic" or "
Magazine" will make surf easy. Surf the site with patience. Pull up older posts.
Do a search by type in the brand name of your device at its search box.
http://electronicshelponline.blogspot.com/
5/23/2014 1:30:24 PM •
Westinghouse...
•
Answered
on May 23, 2014
•
31 views
My son bought this TV and had it hooked up to a
If your TV has an On-screen Menu you should be able to access your Tuner controls. Run your auto channel scan and you should pick up your "regular channels". You may be able to de-select the odd channels and show only the ones you want to use.
11/7/2011 2:51:31 AM •
Westinghouse...
•
Answered
on Nov 07, 2011
•
485 views
A breaker blew in my
not on a surge protector is it? could be tripped....if not, it should have been. some have a built in breaker, unplug it for a couple of minutes and plug it in and try it.
2/26/2011 3:39:34 AM •
Westinghouse...
•
Answered
on Feb 26, 2011
•
112 views
When I turn on my television I have absoluely no
First, look at the screen in darkened room to see if you can see any slight glow from the screen, if it does, then the problem can be the T-CON (not getting the 12vdc) or the main logic board not feeding the signals to the T-CON board.
if not, next place to check will be the power supply module, make sure it has 24vdc which is required by the backlight inverter to work, the reason for not having 24vdc can be from bad DC filter caps (leaking/bulging top, high ESR) or short circuits in the inverter board which will cause the 24vdc supply to go into shutdown mode, so you may have to disconnect the power cable that feed the inverter board to see if the 24vdc will work without the inverter board hookup, you will need to apply about 3~4 amp of load to the 24vdc to make sure it can handle that. There are fuses on the backlight inverter boards also. So there is some troubleshooting you will have to do to find out the causes of the problem you are having.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:
Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find. Please leave rating if it helps.
1/13/2011 4:53:52 AM •
Westinghouse...
•
Answered
on Jan 13, 2011
•
152 views
Westinghouse ltv32w6hd power supply
One of two symptoms on this model (LTV-32W6HD)
Blue light comes on but cannot shut off.
No picture;
OR
No picture but sound is OK.
1: In both cases replace ALL the electrolytic capacitors onthe output side of the power supply. This should get the power switch to worknormally.
2: Replace the small tiny wee little tiny small 2.0A fuse onthe inverter board labeled F1.
This is the small black fuse, not the slightly bigger whiteones labeled F2 and F3.Ta Da...all fixed.
12/20/2010 9:57:35 PM •
Westinghouse...
•
Answered
on Dec 20, 2010
•
857 views
I have a Westinghouse LTV 32 in HDTV. Have had it
I have a Westinghouse LTV32W6HD. Turned it on and there is no video for about 10 to 20 minutes. When the video comes on there is no sound until I go into the menu and select stereo and internal speaker.
Don't know if this helps, but it works for me though my wife doesn't like it.
12/20/2010 10:00:50 PM •
Westinghouse...
•
Answered
on Dec 20, 2010
•
218 views
Not finding what you are looking for?