20 Most Recent Kodak EASYSHARE 5100 All-In-One Printer - Page 7 Questions & Answers

If you are using Internet Explorer 7 or 8 you have an option to scale the size of the printouts. The default settings is to have Internet Explorer fit everything to the page.

Instructions on how to change these settings can be found here: http://www.microsoft.com/windows/ie/community/columns/shrunk.mspx

check the ink cartidges (the color ones) scanners use just black ink to print with (all grayscale) if you can't buy/ afford cartidges right now (who ISN'T broke these days!?!) then set the preferances on the printer to "black/ grayscale" and see if that works ( also is a good test to see if ink is out)

Hello Pfcuozzo, Hi, try replacing the black ink cartridge, if the ink is new, then you have a dirty ink cradle with harden ink, try softening this with a piece of cloth dipped in warm water to soften the ink, once cleaned, do a test print. continue cleaning until you get the right printout.

I'm having the same problem, so far I've removed the printerhead and using a cotton swab, cleaned the printer head using an solution of alcohol antiseptic. so far its not been successful, however I did just put in a few drops of the solution and going to run about 6 test sheets and let it soak overnight to see if that helps.

Having the same problem. Did u get a solution?

Before installing the device you have to unplug it first and install the installer and if requesting to plug that's the time to plug the said device. If not requesting to plug the device just finish to install the software and if its finished. Plug the device and the computer will detect the printer and will install to your system. But all of these you have done already, the other solution is to reformat your computer. Have a nice day

You will need to go to the Kodak printer support site.

Set the print quality to normal or best.
Clean the printhead
Run a calibration.
The Kodak EasyShare AiO performs a calibration every time you install or replace a printhead. However, you can run a calibration if you are seeing changes in the image quality. Calibration aligns the printheads and performs a nozzle health check to enable high-quality prints.
1 Load the main tray or photo tray with photo paper.
IMPORTANT: If you don't have any photo paper, you can use plain paper, but photo paper is highly recommended for calibrations.
2 Press and hold Photo and Cancel together to make a calibration print.
3 Follow the instructions on the calibration print to calibrate the printer.

Hello, Kindly get driver downloaded here : www.brother.com/E-ftp/softwin.html
www.nodevice.com/driver/company/Brother/Printer.html

Jay

Hello, Kindly get driver downloaded here : www.brother.com/E-ftp/softwin.html
www.nodevice.com/driver/company/Brother/Printer.html

Please get it downloaded here : www.kodak.com/eknec/PageQuerier.jhtml?pq-path=7895
www.printcountry.com/drivers/KODAK_DRIVERS.asp
www.opendrivers.com/.../printers-kodak-free-driver-download.html
Jay

you just have to type the password on the printer or check the back of the printer and you will see the customer care service then call them to know more about it,thanks.

Hello and Welcome to FixYa!
The "Printer not responding" message may appear due to many reasons like;

• Bad connection
• Printer Malfunction
• Bad Communication port
• Faulty Drivers
• Printer Spooler not active

As you have stated you have had checked the connections, and also have reset the printer, so going straight to Drivers and Spooler issue.
I'll advise you to navigate to this link, detailed step by step guidelines are mentioned there; Vendor's support page. (Step 5)
If you are on MAC OS-X, this is the support link.

If you have any Confusion, questions or issues regarding your problem do tell me.
Thank you for using FixYa!, Keep visiting..
If you think I was of help, your token of appreciation in the form of rating and a testimonial will be esteemed.
Concerned, Nooh

I can not print from my imac to my kodak 5210 which worked fine with our old laptop

Software and drivers for your printer and operating system can be found here:

http://wwwcaen.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=9098/9099&product=EKN033539

Uninstall your current driver.

Download and install the new software and driver package; this should resolve problems with missing files.

Your print head needs replacing:

Clean the print head then print a demo sheet.

1. Verify that inkjet paper is loaded in the paper trays.
2. On your desktop, start the KODAK All-in-One Home Center, then select the Help [?] icon.
3. From the Help menu, select Maintenance, then select Print head Cleaning. The On/Off light flashes green during the cleaning procedure.
4. When the On/Off light glows a steady green, press Photo and Copy simultaneously to print a demo sheet.

If the Demo print is bad- IE: no black, blurry print etc., then you may need to replace the print head:http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/printhead/AUR1780-9_UE_RevC.pdf Contact Kodak for a replacement: Live phone support is available in English and Spanish at 1-800-421-6699, 9 A.M. to midnight Eastern time, 7 days a week.

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response Thanks, Joe I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309