20 Most Recent
Brother Multi-Function Center MFC-240C All-In-One InkJet Printer - Page 3 Questions & Answers
Print Unable 34
There might be some paper left in the machine. Check the very edges espacially the left side (seeing from the front).
Another reason could be that the encoder strip isn t in right position or is stained from ink.
Anyway try the first solution first.
If you stll have trouble try to open the printer:
http://www.fixya.com/support/t211210-brother_mfc845cw
and have a close look to the encoder strip + disc (and look out for some paper in the edges... ;-))
6/30/2014 9:11:38 AM •
Brother...
•
Answered
on Jun 30, 2014
Cannot connect iphone using bluetooth to mfc990cw
As far as I know, the MFC-240C does not have neither bluetooth or wifi capabilities, so that may explain why you can't connect to it using your IPhone.
I had a MFC240C few years ago and I'm pretty sure it lacks that functionality.,
If you have any other question please let me know though
1/8/2014 4:21:34 AM •
Brother...
•
Answered
on Jan 08, 2014
Need replacement ink pad
I cant see what country you're in, but the following company in the UK can supply most Brother spares:
www.theconsumablesdepot.com
Word of caution: replacing parts like ink pads/waste ink containers on Brother machines isn't intended to be a "user replaceable part"; the machine has to be significantly dismantled in order to get to them.
Brother parts are very expensive, and their authorised agents' service charges are very high, so it's not unusual for Brother machines to be rendered uneconomic to maintain when these type of parts need replacing.
1/7/2014 4:56:33 PM •
Brother...
•
Answered
on Jan 07, 2014
Brother mfc 240c error says print unable 51
Hi Ok try this it may work.
Hapens a lot
1.Go Menu
Type in *2864
Type in 10
Code WSW00 shows
Type in 51
Code WSW51 0000001 will show
Try different values, eg change to 000000 or 0000010
BUT remember original code to get back to
To exit type 99
Also can try.
Solution:
· Machine off
· Switch on the machine while holding down the “menu”button until all the leds are flashing on/off. Now you are in “maintenance” mode.
· Press 80
· Press the “mono start” button several times until you see “purge: xxxx”
· Press “2783” in order to reset the purge counter. You will see: “purge:0000”
· Press the "stop" button.
· Press “99” to exit the maintenance mode.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one
All The Best: Pineworks
·
12/24/2013 2:06:08 AM •
Brother...
•
Answered
on Dec 24, 2013
Troubleshooting : unable 4f cant print
Error 4f mean
the head drive voltage has dropped
from the high to low level in an abnormally short period.This mean your printer need new print head.This will cost you just as a new printer, then think about new printer.
11/28/2013 6:25:17 AM •
Brother...
•
Answered
on Nov 28, 2013
Not finding what you are looking for?