Brother Multi-Function Center MFC-240C All-In-One InkJet Printer - Answered Questions & Fixed issues
Brother mfc 240c machine error 40
The casing internal temperature thermistor has detected abnormal temperature in the machine. Check the thermistor for optimal operation.
6/3/2022 12:33:59 PM •
Brother...
•
Answered
on Jun 03, 2022
•
236 views
Brother DCP 135C paper is dirtied with black smudges
At this website www.reliable-store.com I found so much of information on how to repair vehicles and technical issues in detail.. Also complete, much better language, and they also have live assistance feature
3/7/2018 6:43:09 PM •
Brother...
•
Answered
on Mar 07, 2018
•
114 views
Print unable 36 error
Hello,
The 36 error mean: The machine does not work due to a paper jam. Clear the paper jam, if doesn't work maybe a sensor is dirt or bad. To disassambly the printer you need the service manual and some know how ( electronics knowledge).
All the best !
7/30/2021 9:50:33 AM •
Brother...
•
Answered
on Jul 30, 2021
•
2,779 views
Brother mfc 240c. just installed all new
Yes, you can manually clean the printhead. I can't provide step by step instructions, but the print head is the piece that your ink cartridges go into. There is probably a lever that holds it locaked into place. You will want to take out the ink, then open the lever and remove the print head. Then clean where the ink cartridges sit, then gently clean any coppor contacts you see and then clean the print nozzles on the bottom of the print head. Do all of this with distilled water. Dry completely and re-install along with your ink.
If this doesn't solve the issue, you can buy replacement print heads.
11/11/2017 12:56:54 PM •
Brother...
•
Answered
on Nov 11, 2017
•
122 views
Brother MFC 240C yellow
Common error of brother mfc/dcp printers.
Unfurtunately there is nothing what you can do.
Call brother hotline ask for service/guarantee repair.
10/4/2017 11:16:54 AM •
Brother...
•
Answered
on Oct 04, 2017
•
403 views
Brother MFC 240C alignment problems
I have figured it out! I have a Brother MFC 240CN and I was having the same alignment problem and I followed the instructions from the printer prompt as well as the manual and it does not work.
So, this is what I did. I ran the alignment test print, then when it asked if it matches, I would say "No". And then I would pick number "8" to be the one that most closely matched "0" regardless if it did or not. I did this for the 600 and 1200dpi. Then when I ran the alignment test print again, it looked better! So I repeated it again and again picking "8" each time and it looked better with every test print. After about 4 or 5 tries, it looked normal again!
I hope everyone else with this problem will see this response and I hope it works too. I was getting so frustrated with this problem. Now I don't have to get it serviced or buy a new printer!
9/23/2018 10:24:14 AM •
Brother...
•
Answered
on Sep 23, 2018
•
11,427 views
Can't print
Easy solution is to download drivers from the brother website. Takes just a few minutes and you should then be up and running or printing.
8/19/2017 11:12:20 PM •
Brother...
•
Answered
on Aug 19, 2017
•
83 views
Brother Printer Fax Machine
The connecting depends on several issues. This cant be said within a few words.
You have to read the manual which explains the very diffrent setting (see chap. fax). You can download the manual here:
www.brother.com (choose your country from landscape, choose your country, choose download&support)
Have a look at the faq, too.
If that doesnt help, plz call brother hotline of your country!
8/25/2016 2:18:04 AM •
Brother...
•
Answered
on Aug 25, 2016
•
259 views
Brother MFC-240C Change Unable 50
I also had this problem, your solution was spot-on, remove the top cover and control panel and re-seat the encoded strip. simple.
boy, are you guys good.
11/14/2021 7:40:33 AM •
Brother...
•
Answered
on Nov 14, 2021
•
15,124 views
The Ink absorber pad of
I have all pads removed but I having difficult time finding new pads, no local supplier here in London, Ontario,Canada, found one supplier in the United kingdom for £11.99/$30.00, not sure if this is reasonable cost, I also need the pad which is located at rear of ink cartridges. Any advice/direction wil gratefully appreciated, thanks, Mark.
p.s. I have a MFC-240c all in one brother printer
3/22/2016 3:10:26 PM •
Brother...
•
Answered
on Mar 22, 2016
•
2,126 views
Not finding what you are looking for?