20 Most Recent JVC Everio GZ-MG130 Camcorder - Page 9 Questions & Answers

there was another post about this on here that said they used one of these http://cgi.ebay.com/Easycap-USB-2-0-Video-TV-DVD-VHS-Audio-Capture-Adapter_W0QQitemZ170435042087QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item27aeb85b27 i think. not sure if they actually used it as a webcam or not. on ebay you can search for usb video adapter, there are more than this one. here is the manual to your camera if you need it. its a 20mb pdf so i takes a while to load. http://resources.jvc.com/Resources/00/00/91/LYT1668-001C.pdf

Con Windows Vista, puedes usar Windows Movie Maker (no estoy seguro si se llama lo mismo en español) que viene con Windows!

Mira este tutorial (en inglés...) por las instrucciones.

Buena suerte y saludos desde Israel,
Pelu.

I see failure in booting. I'm afraid your HDD has problem, have check with JVC Service Center near you, chances are high of HDD failure like you have that can be repair.

Have you tried the cord from your camera to your computer's usb port? It should be recognized by the computer, allowing you to transfer your videos to a folder. The camera has a built in memory, so you have to use a cord to transfer the movies and pics.

You can download it from the below link:

http://support.jvc.com/consumer/product.jsp?archive=true&pathId=119&modelId=MODL027853

Check the left hand side of the website and you can locate the instruction manual there.


Hope this helps.


Regards

Anand

I have the same problem

Return it to JVC for servicing. There is a fault in the CCD.

Hi,


The Software for this Model is not Available Online even for Purchase. This Model has already been Discontinued by the Company. The Only way to get the CD / Software would be to Contact JVC. If you could tell me your Location, i would be glad to Provide you with the Service Center Details near that, if possible.

Let me know, so that we could Proceed.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

With a USB cable, or (if it is the dvd model) you can copy the vid from the dvd

I have lost the installation disks for my JVC GZ-MG130EK so I cant upload anything on to my new computer from the camera itself? What can I do?

Your camera's Tele Wide sliding pot is damage or carbon inside,if you have Isopropyle alcohol then few drops give inside the T/W pot and move it right left maybe your problem will solve

You need to practice. There are some easy to use software but it is not supporting Everio files like Intervideo. It can be accepted by renaming the extension to (.MPG). But sometimes having problem with sound and aspect ratio. I suggest to have more practice in Cyberlink its easy just take your time. Good Luck

This model does not support video streaming. you can only transfer videos as file, as if you are connecting an external hard disk drive, sorry, next to this series GZ-MG155 has firewire via docking station.

try www.cellularfactory.com

It is easier to connect your camcorder through the included "PowerCinema NE for Everio". First (since you're running Vista), you have to download a patch. Here is the address: http://www2.cli.co.jp/products/ne/update_everioM7SD/pcm4e_update.htm
Note: Only after you have installed PowerCinema NE for Everio can you install the patch. After you have installed the patch, just connect your MG130 to your computer through the included USB cable. Then the software should run automatically.
Hope this Helps

Eric

here you go...
http://www.jvc-victor.co.jp/english/download/vista.html

Dear i have send a link of your problem in camcorder for hdd error .
if to use this link instructions you are solve your problem.

Hard Disk Error / Hard Disc Error Warning, "recording failed".
These cameras often give Hard Disk Error / Hard Disc Error Warning.
We can recover the video data from hard drive - these cameras often use 1.8" ZIF Hitachi Hard Drive with following numbers (we also recover from all others!)
20GB HTC426020G5CE00 HTC426020G7CE00 HTC426020G7AT00 HTC424020F7AT00
30GB HTC426030G5CE00 HTC426030G7CE00 HTC426030G7AT00
40GB HTC424040F9AT00 HTC426040G8CE00 HTC426040G9AT00
60GB HTC426060G8CE00 HTC426060G9AT00

If you want to save your photos on the SD card you have to choose that option from the cams main menu. If you want to transfer the photos and video to the PC than you'll need the A/V output cord that came with your camera, and, the software cd or download from the manufacturers site. After you've set this up, it can all be done from "My computer or Computer" depending on your OS. Thnak you, Dana

download from here. the manufacturers website

http://support.jvc.com/consumer/product.jsp?archive=true&pathId=119&modelId=MODL027853


there is a link for the manual on the left.