20 Most Recent
Sony Cyber-shot DSC-T10 Digital Camera - Page 2 Questions & Answers
Error code E:62:20 meaning
This appears to be a problem with a connector inside the camera. Try:
- Take the memory card out, clean the bay and the memory card with compressed air
- Take the battery out, clean it and the battery compartment with compressed air.
- Some users report that you can 'fix' the problem by tapping it gently
on the battery compartment, so that may be worth trying as well.
If these things don't work, it will have to taken to a service technician - it's quite expensive to repair, sadly.
Good luck!
When I open the lens, the screen is dark and displays no image of the object I want to photograph
If you see the display information on modes - but no images of the object and the photos are black - for two reasons:1. Defective matrix camera (CCD). Require replacement of the matrix, setting the camera after replacement - the setting is only able to engineer Sony service center.2. Does not work in the camera shutter - to replace or repair the unit shutter in the lens. Repair is possible at any repair workshop of digital technology.3. If you do not see any picture on the screen - the display is damaged camera - needed to be replaced.The exact cause and complete diagnosis is possible only after the removal of the camera.
Vibrating
if you alsow get vibrationOn Sony T100 and similar,
its the vibration canceling unit, i had the same problem.
if you have good hads you can fix it.( on your oun risk)
1) disasamble the camera, you will see black plastic box inside, this is he lens unit.
2) on the botom you see 2 scrwes, they are holding the CCD remove them and the ccd unit will come from the lens assembly
3) the next is the stabilizer unit it is the problematic one. it is located on the left side of the lens asebly and is held by 2 screws.
you can test it by puling out the cable connected to it (the conector is just under the lens) and verifign that the problem is solved. ( you can leave it this way it will shoot fine just without the anti shake)
4) to fix it take it out ,remove the plastic cover, you see the lens on a plastic mount it should be glued to the magnet under it. the problem is that the glue fals apart.
remove one of the pins on wich it slides, and take the lens and the magnet out.
5) reglue the magnet and reasemble the camera.
6) power up and test, for me that solved the problem
if you need more help you can mail me at adisarit(et)yahoo(dot)com this is spam mail so be prepared to wait a few days for reply.
i have a document with pictures explaining it if you need further help
E:91:01
easily just reset the camera with a pencil.
Sony cyber shot dsc-t10 backlight not working
Hello,Yes, the backlight is a separate part. It can be removed from the LCD and replaced.The following video shows how to replace the backlight in a Sony camera.http://www.desmontalo.com/?p=275
Not finding what you are looking for?