Motorola Mobility MOTOMING A1200 Smartphone - Answered Questions & Fixed issues

Hello,

Your in luck! www.cnn.cn you can get full housings and replacement hinge springs for this model phone. Im not sure which parts exactly are broken on yours, but you can get any of the case pieces from that web site. I personally have ordered from there before and have been satisfied.

As far as the repair manual, no, there are none available to consumers that im aware of.

Need anymore help let me know!

mobile format

With the help of the codes you can unlock your Motorola mobile, so get the unlock code for your Motorola mobile through this site www.theunlockspot.com/motorola-motoming-a1200/rs10wp9 , it has the step by step instructions and simple methods for getting the unlock code for your mobile from the network lock.........

Try this, go around the edge of the screen with a tooth brush. If small particles of dirt have lodged there it can cause the screen to get out of calibration. Get the brush in between the case and the screen. Hope that will fixya up.

If you can't hear, then it's the ringer or speaker problem, try with your headset to make sure it's working. If you can hear using your headset, you only need to replace the Speaker, the technician at the mobile repairing shop will fix it for you. Good luck. Thanks for using FixYa.

The a1200 has no format option, you need to flash it with a ROM or preferably a monster pack. You would use a program call RSD Lite for this. Check out www.modmymoto.com, they have it all there...

EJ

there is problem in ur mike ..plz clean ur board with pcb board cleaner...
or
change the new mike

Go to contacts,then view,then shift to name and number ,.. you'll be able to see both name and number simultaneously.

u need to change the flexible/ribbon cable running from ur main PCB to the flap. its available with me in case u require. the solution is 100% guaranteed.

Unless you've changed it, it is usually the last four digits of your phone number by default

how can i connect to the internet using my motoming a1200

Hi there,

Regarding with your problem, you better call your network provider for this issue, they can assist you and remotely unlock your phone.

Hope this helps.

micro

wht kind of software u need sir??

u need whole firmware ??

if so, then plz vist www.motorolafans.com their u'll get ech n everything needed for ur gr8 PDA.
http://www.motorolafans.com/forums/

right form modifying ur cellphone to abt thing u need..

thank u very uch sir.


if u feel my refernce is worth visiting then plz give me a vote/rating sir..!!

call to motorollacustomer care number they will let you no or try logging to motorolla website

You need to format your memory card.. Then you can set a new password..

it seems that the firmware is corrupted, so you need to reflash your phone... i used this link to explain the details

http://www.modmymoto.com/forums/showthread.php?t=338041

NOTE: if you click on a link for the files you need and in the address bar you see a bunch of asterix, replace it with www.motorolafans.com/
eg http://***********/forums/anexample/butthisiswhat/happens/

one word of advice though, stay on the H2 track as long as your phone is an A1200 and not an A1200E or any other version...
the flash i used which fixed the bluetooth problem and a bunch ot others was .08P generic and i have a pure A1200 (dont worry, you'd find out what that means on the site)

your motoming A1200 mobile's unlock code is 1234 or security code is 000000

1234

you have to do a master reset in the set up menu ....

Best bet it to buy a new touch screen element. actually quite easy to do the change out (i have owned one of these phones). Can be found for a very low cost on sites like eBay.