20 Most Recent Sony BRAVIA KDL-40S2010 40 in. LCD Television - Page 5 Questions & Answers

These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV. This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/. If the blinks continues, and non-stop, the fault should be with its main system control IC, and with the memory IC.

Goes from on to Standby by its self because of protection mode that activates for some internal problem. Do you see standby light blinking on tv front? What is model number of your tv? How many times standby light blinking after 3 seconds long pause? Let me know to find out possible cause of problem.

if you can,turn the brightness down (backlight) as this sounds like a bad psu not supply the volts to the inverter to power the backlihjt fully

Check the aspect ratio set. If it is set to wide, there will be black bars at top and bottom of the screen. Go to its picture setting menu, and adjust the settings. If it do not help you, enter its service mode to adjust the picture height. Although this is a semi-skilled work, if you have patience and concentration, you can do this adjustment. There is no need to open the TV. If you wish to get more details about how to enter service mode, and adjust the data values there, check the site linked here. http://electronicshelponline.blogspot.com/

Dear Ariesky Your TV does not support this. Normally when SONY refers to PIP, they mean you can display another analogue ( CVBS - RGB ) or Digital ( HDMI ) input simultaneously. They do not mean you can dislay two normal RF channels together, this would require a second tuner, which this set does not have. Regards

check aft circuit

check the power input socket or may be the power board is defective.

Please check the connector from Main board to T.Con. Board. Panel is even suspected.

Is it a perfect square like there is a box on the screen ? if so it could be an easy fix if not then time for a new TV!! Did it just slowy get worse or was it just like that one day?

6 flashes of light indicates a fault with internal temperature. If you wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic /Timeslide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name / model number / IC used, in the search box at the top right of the display window. Blinking codes and repair procedure to Panasonic Plasma TVs are given in detail.

Go to menue and check settings for sleep mode.Turn off sleep mode.

It could be caused by a bad T-Con board or defective LCD panel. The panel is more expensive than the TV, so hope that it is the T-Con board. Below is a parts list for your TV model.http://www.tristatemodule.com/t-Search.aspx?q=KDL-40S2010

Check and replace its main digital processor board. Contact any service technician.

Check and replace the main board. If you wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

These flashes are called blinking codes, and are fault indications. If you wish to get more details to these blinking codes, check the site linked here. http://electronicshelponline.blogspot.com/ Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

Sounds like a panel fault. If you wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

It almost sounds like a panel fault. If you wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.