20 Most Recent Lexmark All-in-One Printer with PictBridge - Page 7 Questions & Answers

X75 doesn't have drivers for vista.

Hi Alex,

You can go to:

Lexmark X2500 Downloads

There is a Mac tab and Microsoft tab. Click the one that you have. The different drivers are listed for each operating system.

If you need more help, just Comment back.

Thanks for using Fixya.

Hello

Thank you for using FixYa for your problem


Upgrading to Windows 7? Disconnect USB and Uninstall Printer Driver First
Windows 7 Information Use Vista Driver in Windows 7


Please rate our solutions and if you still have problems please call back for more ideas to help you

Thanks
Richard Scott
Technical Support
New Zealand

Are you using a factory new ink cartridge?
Please consider the following:
If you are using a refilled or third party cartridge that may well be your problem. Most manufacturers build logic into their products to prevent the use of “Other Equipment Manufactured” cartridges as well as re-filled cartridges.
They do this to prevent problems from contaminated inks causing problems with print quality or damaging the physical printhead.
If you are using factory new cartridges, then please call the manufacturers Technical Support for assistance with the warranty on the cartridges
Don

Try going into the Control Panel, select printers, select that printer, right click it and click remove. If you can remove it from there first, it may stop trying to communicate with it, allowing you to continue in Add/Remove Programs.

plz try by reinstalling the software and scan your system for viruses

copy the cd to your desktop and run the install from there. i believed the cd is all the way full check this by clicking on your drive, select properties if this doesnt have enough free space to open the program left on it you will get that error. this should solve your problem

try uninstalling the software,disconnect from the net,and then disable your anti-virus.then reinstall the software. This sounds like you might have a corrupted install

www.lexmark.com/support ... search your model ... find your driver.

Hi there,

• Unplug the printer cable from the computer.
• Unistall the printer drivers from Device manager and also unistall the all the printer appications
• restart the computer
• try to download drivers from the website
• after installing the cannon drivers and software it will ask you to connect the printer. 

• then you can connect the printer and and try to scan

Hope this help. Please Rate My Response! Thanks! 
Prem     

Please let us know the name and version of the operating system (Windows XP / 2K / NT, Windows Vista, Mac) that you are using on your computer. This information is important for us to troubleshoot the issue further.

Open your "Lexmark Productivity Studio" software and click the "Scan picture" on the software not on the printer.

you dawn load the driver from the internet.

I have a couple questions for you.
1. Is your cartidge 42 or 42A? The 42 cartridge will not work if you refill it. I learned that the hard way after paying to have it refilled and I got it home and it would not print. If you are using the 42A refillable cartridge, your ink levels will not reset. I called lexmark to ask them after not bieng able to find any answers online. He said that because I am using the 42A, it will print but will not register the level. The only downside is I have to keep an eye out for fading so that I do not ruin the printer heads.

I hoped this helped.

unistall then re-install hope that helps .. after unistall restart pc then install ..

go to www.driversguide.com there you will get drivers for this hardware

As far as paper is concerned, that's kind of up to you, isn't it? ;-)
This should get you the download:
Lexmark X5650 page
You may have to enter the model number again since the page does not seem to link directly.