Amana AKS3040 Gas Cooktop - Page 5 - Answered Questions & Fixed issues
Omega ceramic cooktop error code F
GOOGLE KNOWS check link below
https://www.google.com/search?q=Omega+ceramic+cooktop+error+code+F&oq=Omega+ceramic+cooktop+error+code+F&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8
4/18/2021 2:45:20 PM •
Cooktops
•
Answered
on Apr 18, 2021
•
830 views
Eo1 code on a scott omcan induction cooktop
Try this
- Error code E01 showing on display
- What causes an E01 error code on the CT Electric Cooktop control panel?
- CT E01
STEPS TO VERIFY ISSUE:
Turn the home circuit breaker to the unit off for 30 seconds then back on again. Then retest the unit operation.Or contact the maker direct. They are expensive units and in my experience, if you get 2 years out of them in a commercial setting, you are lucky!
INDUCTION COOKERS - Omcan
omcan.com > ... > INDUCTION COOKERS
INDUCTION COOKERS. Home FOOD EQUIPMENTCOOKING EQUIPMENTINDUCTION COOKERS. Name, Date, Price (ASC), Price (DESC), Item Number.
3/11/2021 6:59:37 PM •
Cooktops
•
Answered
on Mar 11, 2021
•
371 views
Cooktop knobs will not turn. i tried lubricating the shafts with WD 40. no luck. any other suggestions?
WD40 is a Water Displacement (formula 40) spray. You do not need to displace water. Also when it fully dries, it leaves a waxy film to further shed WATER. People use it for everything, it smalls nice, but it was made for one thing only.
Electric or gas cooktop?
Gas have a safety feature, push in and turn, some have an electric lock.
Just sticky, or corroded, use Plus Gas, or some type of penetrating oil.
Did they work before or is this cook top new to you?
Did you read the instructions?
11/18/2020 6:41:24 PM •
Cooktops
•
Answered
on Nov 18, 2020
•
548 views
My Defy Slimline hob shows error 42 when i switch on 2 plates, what might be the cause of this?
Look for a defective capacitor on the circuit board, like on the picture. The top is somewhat curved or even open.
Replace the cap and the ones that are the same. most likely they are from the same batch and will be defect in a few weeks or so. Look at the green capacitors. the top left was blown in my hub.
I could not upload a picture, because I can't switch of my add blocker
12/20/2022 8:30:12 PM •
Cooktops
•
Answered
on Dec 20, 2022
•
7,416 views
I have noticed there's quite a mark up on gas cooktop stove parts, specifically Jen air model number CVGX2423B. I need to replace the valves.
Sorry I am unable to comment on your specific problem, I just wanted to remark that it is the usual practice with bought-in parts whereas those parts manufactured in-house tend to be more reasonably priced.
Often it seems the price of bought-in parts double as soon as they arrive and then repackaging cost is added and then a notional amount of extra profit added for good measure...
Sometimes, when a component bears the name or the logo of the original manufacturer, it is possible to source replacements from that company resulting in a considerable saving. Several times I have managed to do this and once the saving was an incredible amount. The appliance manufacturer wanted £65 plus carriage and tax but the component manufacturer sold me the part for a total cost of £16.60.
11/2/2020 4:33:05 PM •
Cooktops
•
Answered
on Nov 02, 2020
•
59 views
Help omega cooktop only displayinG H or L help
Child Lock:
After switching on the control, the child lock function can be activated. To activate the child lock,
simultaneously operate the right and the left of the slider button and then operate the right of the
slider button again. "L" meaning LOCKED will appear in all heater displays and the control can not
be changed. (If a cooking zone is in the hot condition, "L" and "H" will be displayed in alternation.)
The hob will remain in a locked condition until it gets unlocked, even if the control has been
switched off and on.
To deactivate the child lock, first switch on the hob. Simultaneously operate the right and the left of
the slider button and then operate left of slider button again. "L" will disappear in the display and
the hob will be switched off.
U
4/20/2020 5:27:34 PM •
Cooktops
•
Answered
on Apr 20, 2020
•
1,316 views
Not finding what you are looking for?