Top 20
Brother MFC 240C All-In-One InkJet Printer - Page 3 Questions & Answers
No black printing
Clean the print head in "maintenance mode" !
*Plug the power chord while holding menu to get in maintenance and press 76. 4. black start, then wait until finishing!
I cant get my printer to alignment how do i do it
It should be in the maintenance. You can download the manual from this link. Hope this helps.http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=59690c85ad2ae47919040e5414887fc6&modelid=1071216&q=Brother+MFC-240C
Is the Brother MFC 240c
Yes it is a wireless printer as well.
For further details kindly refer to the manual. You can download one from
here.
Concerned, Nooh.
I want to use my
Yes, you can do that. But you will have to install the software on your laptop to be able to connect it wirelessly. You will need to download drivers. If you need help with that, let me know and I will lead you through it.
I lost my installation disk for my printer how can i download it to get it to print things
Worry no more. You can definitely have you printer up and running. Please follow the steps provided below: 1. You must have an internet connection2. Go to Brother website. Click
here to go to their support page.3. Know the Operating System of your computer. 3.1 To check the Operating System. Click on start then look for "My Computer" or "Computer" then do a right click on it and select properties. 3.2 To know learn more about this you may click
here.4. Once you have noted the Operating system, go back to the Brother's website the select the corresponding Operating System of your computer then selec the language and Click "Search" button. 5. After hitting the search button in step # 4. It will load the search result and look for something that reads "Full Driver & Software Package" under that you will find the available drivers for your printer then Click "Download & Inforation" (Please see attached screenshot)
Ihave a brother mfc-240-c-usb i just got my
You need to download the driver from Brother website. Please click
here to download the driver. Once you on that page Follow the steps from selecting the Operating system to selecting your language then hit the search button. Then it will give you the driver to install this printerTo check the Operating system of your computer you may follow the steps
here.
I don't want to pay
Personally I answer questions for free, so your your little chantage ( that is a French word, look it up!) has to incidence on my mood. If you feel like it, you can try to post the question as a free question and some good samaritan like me will try to answer it. You may have a correct answer that solves your problem and it will not cost you a farthing, maybe a bit of gratitude when you take the time to write a short thank you note.
How do I do double-sided
Flip the copy over and reinsert into paper tray and then copy the second side of your original. This is not a duplex model.
How i change cartridges
open cartridge cover form front site cover and leave your cartridge and change to new one
TQ
How do i clear the
Press menu*2864 within 3 seconds. the screen will show "maintenance". now pres 01 and it will initialise. Press 55 and wait for maintenance again. now press 99 to exit back to date and time.
the machine will have cleared all its memory and returned back to default.
Brother MFC 250C has no
For general troubleshoot of any no power device is always just:
Try a different power cord (these cords are all the same, you can use a standard computer cord)
Try a different power outlet (no surge protector, direct to wall to a known working outlet)
If it still gets no power at all the the power supply has probably gone bad and will need to be replaced.
If the machine is out of warranty however the cost to repair it will probably be more than the cost of replacing the unit with a new one.
Your best bet would be to call around your local printer repair shops and see if they have any of these models on hand as spare part donor machines.
It appears that the yellow
some solution.
ry to clean by properties of program on your computer.
then you try to print some text or image use yellow ink only..
but if it doesn't changed. try to reinstall the driver.
My printer suddenly started printing
You may have run out of other colors in you cartridge, or you just need to do the maintenance.
Turn on while holding menu to get in maintenance and press the the specific keys for the other colors.
I just changed my yellow ink and printer is still
Hi there,
No Cartridge will show on the display if the machine cannot recognize one of the cartridge or one of the ink is empty. Try to unplug the mach from the power outlet then plug it back in after 10 seconds. If the display show "ink empty C" it means the cyan/blue needs to be replace. "ink empty M" it means the magenta/pink needs to be replace. "ink empty BK" it means that the black needs to replace.
Hope this helps. Rate if it works. Thanks
Not finding what you are looking for?