Kyocera Copystar CS-1635 Copier - Answered Questions & Fixed issues
Maintenance light blinks
Enter "10871087" using
the numeric keys
Enter the U251 number using numeric keys.
Press the copy start key.
Select the Light exp. 3. using the exposure adjustment keys.
Press the copy start key.
The count is cleared, and the indication for selecting a maintenance item No. appears.
Keycera machin have problem keycounter massage are given
Go to the service mode by 1087 1087 press 020 then press 25%% or 400% to on it. then press start. after few seconds machine will restart. same process with 021 also. note: first take down the setting list from 000 by pressing start key. this features will get the machine to default factory setting.
THE MACHINE INDICATE J11 WHAT IS THE PROBLEM
j11 indicates that the paper is not being fed from the paper cassette 2.
This can be caused by incorrectly loaded/thick paper. Cassette not correctly adjusted.
Paper feed rollers need to be cleaned or replaced. Blockage or parts failure.
On Feb 15 2014, 12:35 PM
sir if you want to make the copier as network copier then go for a print server. it will be cheaper and it will allow your machine in network. print servers are found in computer shops
I am Thomas from South Sudan my Kyocera Photocopier 1635 Series error code : C6000.What to do sir?
Mr Thomas, this code means Fixing error, firsf switch on your Photocopier Machine then press 1,0,8,7 again 1,0,8,7 display will change will show u000. then press 1,6,3 press start key two times. machine will go off and on again. try that ,if will not work i will give you onather way.
How to reset my copier plz send me a solucation
whats the code man
if it is c600 then got diagonistic by presssing 10871087
then press 163
press start button 3 times to clear it.machine will restart .this is for fuser .
if u require to reset the drum then msg me
Paper not being fed from
You didn't post enough information...does the jam lite come on? Did you try switcing the trays? How many copies does the machine have on it? Are there connectors going to a board in the back of the machine? Did you run the return to default code? If you don't do this for a living other techs can't help you, but it is small enough to be carried to someone and probably fixed pretty cheaply. Good Luck.
I can't get my printer
get a driver which is suited for win7.u can also check in the Microsoft site as some of the printers are not matched with win 7 so some properties might not work.but first try to download the driver from kyocera site
I have Windows 7 in
download the latest version of driver fro win 7.run the software and then connnect the machine to laptop when it asks to.thats it
I have an error code
goto service mode by pressing 10871087.
then press 163
then start 4 times.the machine will restart and wola
Set paper cassette
there is slide lever to set the cassette paper size.if u are not able to do so takeout the tray and look below .there is a white plastic piece .check to see if it is in place or is there some paper stuck.
Front page is dirty
If u can post or mail me Scan Page then its easy to solve your problem...
its front side or back side... if back side then you need to clean your developer... also check recovery blad in drum unit..
Not finding what you are looking for?