20 Most Recent Sentry Fireproof Safe - Page 4 Questions & Answers

When you change batteries the combination that you programmed into the the Sentry Safe will delete and you will get the red light error signal. At A1 Locksmith Service we recommend that you use the original master code that came with the Sentry Safe. If you can not find your owners manual with the master combination. Addtional help can be provided at A1 Quality Safe. (650) 240-5505

it sounds like the selinoid went bad or stuck this pulls the plunger down to release the handle, you might be able to take out the key pad and determine the 2 wires that go to selinoid jumper them out with a nine volt battery good luck. p.s. this could ruin your safe, be carefull. bigds keys

if you have keys make sure they are the correct keys and they slide in smoothly and all the way . If still wont turn try to wiggle the key while turning you may need to pull it out very little to make it turn . I had to do this with my safe and it worked . Later after I opened it I took it to a lock smith to have the lock replaced . Sometimes the tumblers in lock are slightly miss aligned and need replacing . Cost for lock smith to change lock was quite reasonable. Good Luck

Locksmith Instruction manual on how to dial open sentry fire safes.
NOTE: If your safe doesn't have a key, skip Step 3.
Turn the dial to zero.
Insert your sentry safe key and turn it until the plunger pops out.
Turn the dial to the left (counterclockwise) three times to the first number of the combination (pass the first number of your combination two times, stopping on it the third time).
Turn the dial to the right (clockwise) two times to the second number of the combination (pass your second number once, stopping on it the second time).
Turn the dial to the left to the last number (stop the first time on your last number).
Pull the handle down; cracking Sentry Fireproof Safe open.

New Sentry Electronic Fire Safe Opened in Seconds with No ...

? 8:22 https://www.youtube.com/watch?v=u3p5KUNfDG0 May 15, 2015 - Uploaded by Mr. Locksmith New Sentry Electronic Fire Safe Opened in Seconds with No Sign of ... Marc Tobias and Terry Whin-Yates open a locked Sentry Fire Safe in ...

Unlocking sentry safe without keys!! - YouTube

? 3:41 https://www.youtube.com/watch?v=Zy5kJ5Uqa2o Jun 7, 2012 - Uploaded by PAWS611 You saved me from destroying sentry fire safe with a mini-sledge and .... haha haha doubted you at first but I got it open just kept wiggling it ...

Sentry Safe Not Safe - YouTube

1-800-828-1438 sentry cust service

I need a replacement key for Brinks model 5050 key # 21

Key override
If your electronic lock fails or you do not have any codes
available, you may use a key override to access this unit.
1. Remove the battery cover, disconnect and remove the
battery holder.
2. Insert the skeleton key (second set of keys provided)
into the key hole inside the opening for the battery.
3. Turn the key to the right.
4. Turn the four-bitted key to the right.
5. Open the door.

You can download the user manual here:
http://www.sentrysafe.com/pdfs/OwnersManuals/172967.pdf

Sentry Safe Not Safe - YouTube

? 5:14 https://www.youtube.com/watch?v=CmAQN6hJ1wQ Jan 21, 2012 - Uploaded by lolitsmexd Video blogging about Sentry Safe and how easy its to break into one. For a Fire Proof and Water Proof safe ...

Open a sentry 1610 safe - YouTube

? 3:46 https://www.youtube.com/watch?v=vdI6m24GIKs Mar 9, 2014 - Uploaded by Brad Snoke There is an actuator inside the front that seems to fail... ... NewSentry Electronic Fire Safe Opened in Seconds .

Your only solution if you can not find your owners manual it is posted in is to order keys and combination from the serial number on the safe or drill out the locks