Top 20
Dewalt DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver - Page 9 Questions & Answers
I have a DeWalt D2570 - GB. Stopped working. On disassembly I found a bare wire from the capacitor. Where should it go?
A photo would greatly help with your issue, are both wires still attached to the capacitor?? in not, the capacitor must be replaced with one of the same value,
if the capacitor is ok, look for a wire with solder on the end but nothing else attached to it, or a solder point on a card with a hole in it or a solder joint that has broken free from the card,,, if you can solder well, and have the equipment,. it is good at this point because You'll need to re-solder them back together,,
again a photo will help me greatly in telling you exactly how to fix
7/18/2022 6:55:55 PM •
Dewalt Drills
•
77 views • 0 helpful votes
My Dewalt DWD460 slows down when I depress the trigger all the way. Why? A bad switch or Module??
If the speed control is the trigger, it is basically pushing the slider of a potentiometer up and down the track varying the control voltage to the speed control module.
Basically it is no different in principle to an old fashioned rotary or in-line volume control and just like a volume control the track can become dirty or wear out in places producing unpredictable and erratic operation.
Sometimes a thorough soaking with switch cleaner will restore the function.
12/3/2020 4:37:58 PM •
Dewalt Drills
•
118 views • 0 helpful votes
Not finding what you are looking for?