20 Most Recent Sony KDS-60A2000 60" HDTV - Page 3 Questions & Answers


Follow the money or in this case the power cord which goes to the power supply board---feel free to tell me if model here is correct and what problem is?

Sony KDS-60A2000... | Answered on Apr 20, 2012


5 flashes - Lamp Driver - (lamp driver faulty)

This is the error code that usually means the ballast (it is the power supply for the lamp) is bad.

SD TECH

Sony KDS-60A2000... | Answered on Apr 20, 2012


Look to see lamp installed correctly and also if not working look for the red light on the front to blink a specific sequence of blinks---an error code like 3 blinks pause, etc

Sony KDS-60A2000... | Answered on Apr 16, 2012


I have the entire factory manual for this and it does not have that information---the original owner manual will have that information.

Best way here for you is to call Sony Customer Service and have them step you thru this--all done with the remote and the power button on the set.

You might also request if you do not have it either a free printed copy or a link that will provide you with one online for free.

Sony KDS-60A2000... | Answered on Apr 05, 2012


they do not sell the part (sony) you have to buy the entire board and I would like to see a video of someone doing it--give them 10 tries..

Sony KDS-60A2000... | Answered on Apr 03, 2012


If only one does not work and another does the board it is mounted on will have to be replaced.

Sony KDS-60A2000... | Answered on Apr 03, 2012


If the screen has a yellow green color to the whole or most of the screen in this model it may be a defective optical light engine.

A photo posted here of the issue or elsewhere might tell me.

Sony KDS-60A2000... | Answered on Mar 21, 2012


With the set turned off:

RESETTING THE LAMP TIME
When replacing the lamp, use the following to reset the lamp time.
1. If the Self-Diagnostic screen is already displayed, proceed to step 4.
If not, Power off (Set to Standby mode).
2. Press DISPLAY Channel 5 Sound Volume -
POWER
3. To access the Lamp reset, press 5 until the TIME category displays.
4. Press 1 until the RSET item displays.

Sony KDS-60A2000... | Answered on Mar 01, 2012


Hello
The power supply regulator board has the fault. There ie no repair to this board. You have to replace it as card basis.
This is the picture of the said power supply board to your Sony TV.2_5_2012_4_35_40_am.jpg

Sony KDS-60A2000... | Answered on Feb 05, 2012


there should be an option listed in your menu to do this. I

Sony KDS-60A2000... | Answered on Oct 10, 2011


Service manual indicates the 9 blink code to be a power supply problem, also known as the "g'' board. because of the relative complexity of the TV, I would recommend having a repair shop check the TV and confirm the problem. Good luck !

Sony KDS-60A2000... | Answered on Oct 03, 2011


I'm sorry for the difficulties you're experiencing in locating the lamp door of the TV. The Lamp door is located on the right side of the TV. I'm providing a photo with Lamp door is marked. Please review the below picture.

shajanrs_195.jpg

Thanks for understanding. Please let me know if you require further assistance.

Sony KDS-60A2000... | Answered on Sep 27, 2011


The lamp door is on the back bottom left of the TV. You can get the manual on the link below.
http://www.docs.sony.com/release/KDS50A2000.pdf

Sony KDS-60A2000... | Answered on Sep 27, 2011


You lamp is building up a internal resistance and that is why, it is shuting down on you, replace the lamp, that should take care of your problems, and you and purchase one at www.partstore.com..

Sony KDS-60A2000... | Answered on Sep 21, 2011


Contact a service center for replacement. Seriously, the 60inch panel has to be removed in order to replace the front film which is no easy feat due to its size. Since it is already scratched though, you might try using a polishing kit to see if the scratches can be buffed out. Will never be back to original unless replaced, but might be worthwhile depending on scratch severity. Check with service center or local electronics retailer for the polish kit. Some rental places may be able to buff the display for you as well, but don't expect a guarantee of results. Worth the try though.

Sony KDS-60A2000... | Answered on Aug 21, 2011


check this out from someone else with same problem, note customer found the answer.

http://www.fixya.com/support/t1059431-four_blink_code_sony_kds_60a2000_rear


Read the full page, before you rate my help let me know what you found.

SD TECH

Sony KDS-60A2000... | Answered on Jul 12, 2011


This is a error code normally its the lamp thats burnt out. Count how many times it blinks and check this link for the diagnosis.

http://www.somelifeblog.com/2007/08/sony-tv-led-blinking-codes-what-does-it.html

Sony KDS-60A2000... | Answered on Jun 17, 2011

Not finding what you are looking for?
Sony KDS-60A2000 60" HDTV Logo

191 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sony Televison & Video

  • Sony Televison & Video

Most Popular Question

sony kds 60a2000 no sound

  • Televison & Video
Loading...