20 Most Recent
Directv Plus DVR DTV Receiver / 100-Hours Video Recorder - Page 4 Questions & Answers
DVR recording problems
i am not terribly familiar with these systems but there are probably two sattelite in ports on the back of the receiver, one is a line for watching one program or recording, the other strictly for recording, one of these inputs is probably no longer receiving signal
Direct tv has snow in picture cant see nothing
First, how is the receiver connected to your TV? If it's via coax, the most likely culprit is the coax from the TV to the rcvr. If you wiggle the coax and the snow goes away, you've found the answer. If it goes away, either get a new piece of coax or tighten the connection at both ends.
DVR lockup
I realy cant pin point your issues butit sounds like they maybe going bad here isnt a hard drive wipe they may need to be replaced im sorry i couldnt help anymore
Lost power for one second and now cannot get my caller ID to work
unplug the telephone cable from the back of the receiver and plug it a basic telephone to check if there is a dial tone. if there is a dial tone restart the receiver without the the telephone line plugged in. after it loads and u have a picture, plug in the telephone line. call the home to check. if its not working the modem in the receiver has gone bad.
Direct TV HD Receiver/Recorder codes
Check the Innovage manual for the automatic code search. If it works, you still may not have full control of your HR20. Try to program your Directv remote to operate your components
Directv dvr
unplug all the cables except the video out and the power cord. if i loads and stays on after the 14 min. there is a cabling or dish issue. if it turns off the dvr is bad
Burning smell
unplug the receiver and call directv to send a new one. the dvr may have hard drive electrical issues that could lead to bigger problems
Directv receiver not able to load up
unplug the satellite cables from the dvr and restart it. it may or may load. if it does u can watch pre-recorded programs that are still on the hard drive
DirecTV Venezuela
no it wont sorry. once a card is activated in a receiver it is married to that reciever. only directv sends out new cards to replace damaged ones. If you buy a new receiver it will come with a new card that you will have to activate
How to i hook-up a directv dvr plus to two tv's?
plug one tv using coax (screw in cable). plug the other using composite video cables( yellow, red, white). It will be easy to connect the tv that's the farthest with coax, its cheaper to purchase 50ft of coax vs 50ft of composite video.
Thomson top up tv recorder Model 16300 wont record
Found this on another site. it worked for me.
Do the following:
Menu > Setup > Help
* Then press the Green Button (Even though it doesn't show as an option)
* Then press the Red button for a full reset
Hope this works for you.
All the best
Pottysam
Nokia dbox
Go to bigmaq.co.uk. Important-download toolbar. On toolbar under the tab 'Keys' will be the latest key codes for all different the cable boxes. Click on the one you want & write it down. On Nokia Neutrino remote, press blue button for features menu, scroll down to Tuxbox commander, press OK. On more files, scroll to Keys & press OK. Scroll to key list text press 4, a list of key codes comes up. Scroll through codes until u find the same code with one digit out( near end of code) press 4 to highlight and change code number by pushing L-R or Up-Down. Push home button & when prompted save. push home button & all should be ok. If the code is changed in the next few days just go to bigmaq.co.uk and press keys tab for new code. Not as hard as it sounds. Love Hornet
Dbox
Big maq is Good
But i Find this toolbar below to Have the Lot
Plus user freindly Peeps to help you out with all your Cable Box Fixes ......Paul
http://TechnoSource.OurToolbar.com
Lost power
called DirectTV found the unit was fried!"
thanks anyway
Dvr recording skip sound
probably a dying hard drive, but could just be corruption, delete all effected recordings, monitor, if issue continues delete all recordings unplug receiver for 10 minutes, monitor new recordings if continues receiver may need to be replaced
Not finding what you are looking for?