Hi ezheng1000,
A battery reset procedure should bring your Ti 84 Plus back to life.
Make sure the batteries are in correctly? The batteries alternate negative/positive, positive/ negative and so on. The first time I put the batteries in, I didn't have them in correctly. I know if it happen to me that anybody could make the same mistake. And of course, the calculator will never come on if the batteries aren't in correctly.The process below should reset your calculator.
Please be prepared to re-install the calculator's OS if you run through this process.
1). Pressing the
[2nd] key followed by pressing and releasing the
[Up Arrow] key. This adjust the contrast in case the contrast was to low. Keep repeating if necessary for about
10 seconds and, then go to the next step. If calculator comes on and responds to key functions your done.
2).
Remove one of the AAA batteries. Press and hold the
[CLEAR] key. While holding
[CLEAR],
reinsert the AAA battery and then turn the calculator on. The calculator should display the
message "
RAM Cleared". Release the
[CLEAR] key and then press it one more time to remove the message. If calculator starts responding to key functions your done.
3).
Remove one of the AAA batteries. Press and hold the
[DEL] key. While holding
[DEL], reinsert the AAA battery and then turn the calculator on. The calculator should display
"
Waiting...Please install calculator software now". Follow the instructions for the
TI-83 family or TI-84 Plus family to reinstall the calculator operating system.
4). Steps to re-installing the operating system:
~Connect the TI Connectivity cable between the PC and the calculator.
~Click on Start >> Programs >> TI Tools >> TI Connect >> TI
OSDownloader~Follow the on-screen directions to reinstall the calculator's OS.
5). Remove all of the batteries including the round lithium battery for 5 minutes. After the 5 minute period, reinsert all of the batteries and turn the calculator on. Adjust the contrast if necessary.
6). If the above process did not work. Try re-doing the procedure and, extend the time in step 4, by 5 minutes to 10 minutes before you put all the batteries back in the calculator. These calculators can be a little stubborn at times so, keep trying and follow the procedures.