Sennheiser CX 300 Consumer Headphones - Answered Questions & Fixed issues

yh im having the same problem good to know its not just me

Sennheiser CX... | Answered on Nov 02, 2019 | 5,834 views

It's likely the groud connection in the cable is broken. Possibly at the plug, it would mean no centre focus and no bass as the headphones get only out of phase sounds. I'm guessing you've tried them in another device - a faulty sockey would do the same.

Sennheiser CX... | Answered on Jan 21, 2018 | 39 views

This confirms that the wire is open on the inside and so the only job out for you to to have a close SURGERY to be done to rectify .
You must dissect the wire to see the inside layers, now as you tug the free state of the wire will confirm the position of the wire break. Cut and **** the wire sleeve to see the strands where it has come off, use a good soldering iron to solder after cleaning of the wires. Insulate the joints properly with tight taping and bind them together so that the fault will not recur.

Sennheiser CX... | Answered on Mar 19, 2011 | 561 views

You can find the answer by clicking my user name and looking at the tip for headphones.

Sennheiser CX... | Answered on Feb 19, 2011 | 582 views

There is a poor connection in the headphones, they are not really designed to be repaired, but you have nothing to lose by trying as they may end up in the bin either way. Not what you wanted to hear sorry.

Sennheiser CX... | Answered on Jan 11, 2011 | 399 views

well... you just have to take off the ones that are on... and then replace them with the desired ones... smooth action ;)

Sennheiser CX... | Answered on Dec 13, 2010 | 208 views

Contact sennheiser. You may need to have it replaced. The problem is with your audio jack.

Sennheiser CX... | Answered on Oct 14, 2010 | 258 views

had the same problem with the right ear bud and I don't know if it is suggested in the manual, but cleaning the mesh on the ear bud with a cotton stick dipped lightly in alcohol (almost dry) helped with me, the sound is back 100%.

I hope it helpes with your too.


Sennheiser CX... | Answered on Sep 07, 2010 | 816 views

You could have a look at my tip on repairing dodgy cables and plugs on headphones. Though if it will be any good with your type of headphone, is up to you to evaluate.

Sennheiser CX... | Answered on May 12, 2010 | 689 views

This is normal. The company designs them so that the cord hangs down one side to your music player/radio, etc. If you look at the headphones, there is an "L" and an "R" on each earpiece, put them in the correct ear and you've got them on correctly for proper stereo sound.

Again, the reason one cord is longer than the other is to allow for the cord to hang down one side to your player. Sony and many other 3rd party earphone makers also have similar designs, while there are some that still use the center cord and equal length ear piece cords.

Hpoe you found this very helpful, and best regards!

Sennheiser CX... | Answered on Jan 29, 2010 | 266 views

I have been having the same problem for the past week, I have just fixed it, reading your post gave me the idea to clean them and it actually worked

What i did was to "heat them up" with a hair dryer so that any wax from my ear that had gotten inside would "melt", then I cleaned them with alcohol and a q-tip and I made sure I let a bit of alcohol to get inside the ear bud, then I dryed it with the hair dryer again very carefully and tested to see the results and WHALA works just fine

Sennheiser CX... | Answered on Jul 15, 2009 | 2,330 views

You might want to try using a different size of the earpieces that come with it, and make sure they're inserted fully into your ear. They come with three different size earpieces because people's ears are shaped differently, and having the right size can make a HUGE difference in the sound. If it's done right, it should basically feel like you've just inserted an earplug into your ear.

If that doesn't help, and you've tried another pair of headphones to verify that it's not a problem with your sound source, I would guess you were unlucky enough to get a defective pair.

Sennheiser CX... | Answered on May 11, 2009 | 915 views

Hello Timothy, the microphone has a 3.5 mm connector, which has a thread, you must unscrew this thread and you should be able to exit
Discuss the type of connector you have
I hope you can solve the problem
Greetings Franco Dosil

Hola Timothy, el microfono tiene un conector de 3,5 mm, que tiene una rosca , debes desenroscar esta rosca y tendria que poder salir
Comenta el tipo de conector tiene
Espero puedas resolver el problema
Saludos Franco Dosil

Sennheiser Audio... | Answered on Jun 21, 2019 | 23 views

Hi David, comment that cables are wrong in the transmitter, to try to find the best possible solution
I wait your answer
Greetings Franco Dosil

Hola David, comenta que cables estan mal en el transmisor, para tratar de encontrar la mejor solucion posible
Espero tu respuesta
Saludos Franco Dosil

Sennheiser Audio... | Answered on Jun 07, 2019 | 32 views

Hello Mike, your LG TV, does not have a headphone output, it only has optical fiber audio output
the options that I suggest are,
1) Connect the optical fiber output of the LG, to an AV receiver, that has said input and place the headphones in this equipment,
2) Buy an optical fiber to audio converter by RCA L and R and this is connected to a headphone amplifier
I send you links to the products that are sold in my country
I hope you solve your concern
Greetings Franco Dosil
This is the headphone amplifier
This is the optical fiber to audio converter by RCA L and R

Hola Mike, tu TV LG, no cuenta con salida de auriculares, solamente tiene salida de audio por fibra ?ptica
las opciones que te sugiero son,
1) Conectar la salida de fibra ?ptica del LG, a un receptor AV, que cuente con dicha entrada y colocar los auriculares en este equipo,
2) Comprar un conversor de fibra ?ptica a audio por RCA L y R y este conectarlo a un amplificador para auriculares
Te env?o links de los productos que se venden en mi pa?s
Espero logres resolver tu inquietud
Saludos Franco Dosil
este es el amplificador de auriculares
Este es el conversor de fibra ?ptica a audio por RCA L y R

This is the headphone amplifier
Este es el amplificador de auriculares

This is the fiber optic to analog audio converter
Este es el conversor de fibra ?ptica a audio por RCA L y R

Sennheiser Audio... | Answered on May 01, 2019 | 47 views

Hi Edgar, it is important that the receiver works, because there is a dialogue between the transmitter and the receiver to confirm that they are on the same frequency, that is why the transmitter is blinking, you should repair the receiver and look for the frequency or channel that the transmitter is found and it will stop flashing

Hola Edgar, es importante que el receptor funcione, porque hay un dialogo entre el transmisor y el receptor para confirmar que est?n en la misma frecuencia, por eso es que el transmisor esta titilando, deber?as reparar el receptor y as? buscar la frecuencia o canal que se encuentra el transmisor y este dejara de titilar

Sennheiser Audio... | Answered on Apr 15, 2019 | 63 views

Not finding what you are looking for?
Sennheiser CX 300 Consumer Headphones Logo

Popular Tags

31 questions posted

Ask a Question

Usually answered in minutes!

Top Sennheiser Audio Players & Recorders Experts

Michial Gueffroy

Level 3 Expert

1140 Answers

Rob Beech

Level 2 Expert

63 Answers

Brad Brown

Level 3 Expert

18121 Answers

Are you a Sennheiser Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides