20 Most Recent Pioneer AVIC-D3 Car DVD Player - Page 2 Questions & Answers

You need to get a module that makes it work d

Write to Pioneer with Model number & serial number with a letter of explanation and they will respond with the code.

The D3 does not have a good navigation system in it, and because it is old and beyond its life cycle the fractional wear on the drive causes it to have trouble reading discs. Try cleaning the disc with a little water and soft cotton cloth. Do not touch the bottom of the disc after you clean it. If that does not work, then you need a new disc. You can try making a copy of the disc you have. If the program on the disc is good then you just need a copy that your unit will like. To make it simple.

First what system do you have? The D3 or the 4300. You might check to see if you turned on the rearview camera. If so this could be your problem. The rearview camera comes on when you put the vehicle in reverse, turning off anything else until the vehicle is put back into another gear.

Check your EQ setting for each source, sometime on certain unit each source can have it own setting. May be try to reset it by disconnect the battery and reconnect. If you still have a remained warranty, contact Pioneer and send it in for service. Hope that would help.

YOU NEED TO BUY A SWITCH FROM WALMART($3), 2 OR 3 PRONG, CONNECT THE GREEN(PARKING BRAKE WIRE) TO THE POWER PRONG ON THE SWITCH AND CONNECT A GROUND WIRE FROM THE GROUND PRONG ON THE SWITCH TO ANY PEICE OF METAL ON YOUR DASH...FLICK THE SWITCH TWO OR THREE TIMES AND NOW YOU CAN WATCH VIDEOS WHILE IN MOTION.

HI click on this link to get the MAP for EUROPE

Map disk here

hi boss my nokia 3230 do restsrt & hanging problam