Pioneer DEH-P2900MP CD Receiver /AM/FM/MP3/ CD Player - Answered Questions & Fixed issues

What's not explained in the manual is that you need to do this while in the clock setting mode. Radio OFF/ press and hold SOURCE/ while in this mode, press FUNCTION to scroll thru the auxiliary inputs/ press ^ & v to turn on and off/ SOURCE to exit.

Try following this video. Maybe you could get it done!

It is a universal harness connection these days most cars vans now match

One of the easiest ways to cure RF interference is using these popular ferrite rings.

You may download the installation and owner's manuals fromhttp://www.pioneerelectronics.com/PUSA/Car/CD-Receivers/DEH-P2900MP

You may download the owner's and installation manuals from http://www.pioneerelectronics.com/PUSA/Car/CD-Receivers/DEH-P2900MP

Download the user manual to your car player, and see whether it can possible. To download it, click here. It is a tricky free site indeed.

Check if there SHORTING TO THE GROUND of the speaker wires or the speakers. It will be best to check all the speakers using a AA cell as you will hear the audible sound.If not the output IC is short and needs to be replaced.

http://www.visions.ca/(S(rr2vgijvuxdpfluxuq1frq45))/images/Catalogue/Product/Manuals/english/DEH23UB/deh-23ub_ownersmanual0920.pdf

Check all of the fuses in your car. Chances are it blew a fuse that is still hot with tthe key off such as lighter or something like that. You probably have two fuse boxes, one in the engine compartment and one under the dash or in a kick panel inside of the car.

Not sure what you mean by memory wire but usually it is: Yellow - 12V constant Red - 12V switched by ignition
The 12V constant on the yellow wire allows for settings to be stored when the ignition is off. The 12V switched by the ignition on the red wire is what powers the unit up for use.

go to store that sells car decks and look for a wiring harness for ur car its about $7 mybe and prettymuch match the colors on ur deck to the harness and then pull ur old deck out and pull the harness from the back the back of that deck and plug that into the wire harness u just bought and hook up the antenna for radio andput the deck into the dash the wire harness should also come with so directions too just in case

black=negativered=live yellow is for memory witch should be conected to a permenent live blue is for electric areal and the rest are for speakers

Its possible that you have some problem with the amplifier or bad wire connections; check this wiring guide:

Orange - 12V constant
Red - 12V switched (acc)
Black - Ground
Green - Left Front +
Green/Black - Left Front -
Grey - Right Front +
Grey/Black - Right Front -
Green/red - Left Rear +
Black Green - Left Rear -
Grey/Red - Right Rear +
Black/Grey - Right Rear -

Keep us updated.

if that radio is of the anti theft variety you will need the code to get it working. if the radio is completely dead i suggest first to recheck the cigarette lighter fuse (that is frequently) the circuit the radio is on. interupting the power would be a good way to reset the radio. quickest way is to just unhook the battery for about a half hour or so.

you may have a bad speaker. try connecting a different speaker output to the speaker and see what happens. if it still doesn't work, you have a bad speaker. if it does work, that output is probably bad and the output ic will probably need to be replaced. there is also a possibility there may be bad solder connections inside of the deck.

I have the same model stereo and mine did the same just tonight! Ticked me off. I put in a CD and it played (been playin' CDs with no problems earlier) then the CD itself messed up. So I hit the eject button and nothing. All I see is AUX and radio tuner on it. No CD. what else sucks is I don't have an antenna hooked to it yet, (took out of my old van that was totalled so I didn't get an adaptor for antenna). I looked for a reset button on the face and under and I didn't see any. If you solved this issue, please let me know.

http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/370967683DEHP2900MPOperationManual1027.pdf
hi, if you click on the above link it will take you to your user manual for you model.
to adjust the clock it is on page 23 of section 7.
i hope that has solved your problem and please dont forget to rate my solution.
cheers

you must have the euro type plug go to any car audio shop they will supply you with the correct conversion plug



happy days


good luck

Turn the power off, and press 'clock' for display. Then press 'audio' for a few seconds until the numbers on the screen started to blink. Set the time using the arrow keys.