20 Most Recent Panasonic PT-52LCX66 Projection Television - Page 6 Questions & Answers

Hi,

Are there any Red, Green or Blue Spots on the Screen?

If yes, There is corrupt data in the EEPROM circuit of the TV. Panasonic
is aware of this problem and you may be able to get the repair fixed under warranty. The fix is to use a special EEPROM reset tool , but requires disassembling the TV and should be performed by an authorized repair technician.

What I would suggest is to call Panasonic at 1-800-211-PANA (7262) and inquire about the warranty for this repair. The last one of these I had in my repair store, Panasonic paid me for the repair and sent me the tool to perform the EEPROM reset. The customer didn't have to pay anything. If you have trouble getting anywhere at Panasonic's phone number, then I would suggest calling a local repair shop and tell them you are aware of EEPROM corruption problem on his model and that Panasonic has been known to pay the servicer for repairing the TV. The servicer may need to contact Panasonic directly to set up a case # to obtain the EEPROM reset tool.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Pull the lamp out and install again and reset with the orignal remote control. (not a universal)

count # blinks and call tech support

Yes,the lamp it to produce the tv picture.The remote only deal within the picture.

Yes I get the same problem with my Sony XBR and its Pace PVR.
The problem seems related to using HDMI interconnects; viewing the PVR through component leads allows the TV to switch modes easily, otherwise I have to turn the tv off and then back on again.

I can help you change your bulb and reset the lamp timer for your Panasonic PT-52LCX66 Projection HDTV.

1. Installation instructions for the TYLA1001 bulb are here.
2. Follow the steps in my Fixya Tip for the complete lamp timer reset procedure.

I hope that helps.

I can help you reset the lamp timer for your Panasonic PT-52LCX66 Projection HDTV.

Follow the steps in my Fixya Tip for the complete lamp timer reset procedure.

I hope that helps.

I can help you reset the lamp timer for your Panasonic PT-52LCX66 Projection HDTV. The buttons used are the TV's volume down and the remote's number 0, not the 'split' or pip for your model.

Follow the steps in my Fixya Tip for the complete lamp timer reset procedure.

I hope that helps.

I can help you reset the lamp timer for your Panasonic PT-52LCX66 Projection HDTV.

The buttons used are the TV's volume down and the remote's number 0.

Follow the steps in my Fixya Tip for the complete lamp timer reset procedure.

I hope that helps.

I can help you reset the lamp timer for your Panasonic PT-52LCX66 Projection HDTV.

Follow the steps in my Fixya Tip for the complete lamp timer reset procedure.

I hope that helps.

I can help you reset the lamp timer for your Panasonic PT-52LCX66 Projection HDTV.

The buttons used are the TV's volume down and the remote's number 0.

Follow the steps in my Fixya Tip for the complete lamp timer reset procedure.

As for sound, more info is required.

I hope that helps.

I can help you reset the lamp timer for your Panasonic PT-52LCX66 Projection HDTV. Follow these steps in my Fixya Tip for the complete lamp timer reset procedure.

I hope that helps.

I can help you reset the lamp timer for your Panasonic PT-52LCX66 Projection HDTV.

Follow the steps in my Fixya Tip for the complete lamp timer reset procedure.

I hope that helps.

press the down volume on the tv at the same time press the up dvd/vcr split button on the remote. do this for at least 5 seconds and it should reset

when the notation comes up , you usally only have hours of life left. the slightest **** or movement of the lamp could cause it to go out. I would really start looking for a new one quickly

The green blinking lamp means that the TV is getting ready to start the lamp, and then one red LAMP blink means the lamp will not start. You may need a new lamp (Part TYLA1001.)

If a tech confirms this, and you can source the part, you can find TYLA1001 installation instructions here to save a few dollars, and PT-52LCX66 lamp timer reset steps here.

I hope that helps.

Three orange power blinks indicates a 'Malfunction 5', and that your unit requires servicing. You can try pressing POWER on the unit for over 7 seconds, and then turning the set back on after 5 more seconds. If this doesn't help the set needs servicing.

If you didn't reset the lamp timer after replacing it, you might try that by following these steps.

If you think browsing the troubleshooting section of your operating manual may help, you can access it here.

I hope that helps.

I can help you reset the lamp timer for your Panasonic PT-52LCX66 Projection HDTV. The buttons used are the TV's volume down and the remote's number 0.

Follow the steps in my Fixya Tip for the complete lamp timer reset procedure.

I hope that helps.

According to the lamp manual you just need to power the set on with the remote and then press (and hold) the Vol - button on the front of the set, While holding the Vol- button on the front of the set press and hold the PIP button on the remote. HOLD both for more than 5 seconds or until the lamp timer has been reset to 0 appears on the screen.

If this solution works let me know by voting for this post. If not then let me know.

If you need further assistance or if this did not help you please comment to this post and I will try to help you further.
Thanks for using FixYa
asnowman

This works for most Panasonics

Turn on Power
Pres and hold the "vol-" button on the front of unit and the "split" key on the remote together for over 5sec.

Screen should say " Lamp time was reset to 0"