20 Most Recent
Kyocera Copystar CS-1820 Black and White Copier - Page 9 Questions & Answers
The touch panel is not inialization
if its just locked up then ull have to re set 2x rom chips one inside the operation panel (look like laptop mem chip) and second on the back of the main board make sure u unplug the mains.
PRINTER WONT PRINT RIGHT
most likey you have a print driver issue..totally delete the print driver..re add the driver using the kx driver found on kyocermita.com
Copystar 1810 GS
that's because it thinks it's out of toner. keep opening and closing the front door and let it run.
I have a KM4050i and am getting 1102 and 2101 errors
the copier needs to login into each station... like a user logs in... but it needs admin rights... so whatever account is logging in must have admin rights number one... number 2 the folder must be shared with everyone and they bust have admin rights to the shared folder... you can change that after stuff starts working but for testing thats best... third make sure that you use the ip address... the login username and the login password of the pc you are scanning to... you use the ip address because dns can destroy connection if its not configured right meaning pc name may not be detected... to test ... just goto press scan... then attempt to edit the address book entry for the pc and scroll down to the smb entry and then test... you can test it straight from the copier changing settings and testing until you get a connection... this is after you have made all changes on the pc... now once you get a connection... you are good... any more questions or if you feel this is a bit jumbled... email me and we will set up a chat session and I will walk you through it...
I’m happy to assist further over the phone at
https://www.6ya.com/expert/norman_d2fa496dce30c65d
What do you mean by error c6000 in KM4050?
Error code c-6000 means fuser error. It would be best to replace the fuser unit as a complete assembly, but sometimes just the thermostat can be replaced, which would be cheaper. Either way, an authorized Kyocera dealer should have these parts.
I have a kyocera cs-1650 with the error message
It is problem Program not properly configure.set up fax program,Fax line type,Receiving mode,number of ring count.Other help follow your copier User Guide manual.If you do not fix your problem then you call a service technician. who support this machine.
We have a red line thru our scans? I have cleaned
red line? this is a black & white
is the line apear only when you scan ?
try and make a copy of the glass if you do not see line .than you problem is that **** glass that scanner uses.IT MAY HAVE WHITE OUT OR INK CLEAN IT .it long thin along the the paten glass
hope that help
How do i replace the toner?
Open the white door
pull bypass door towards you
move the blue lever towards you
slide lever to the side ,lift out the old cartridge
pull tape on new toner
snap in new toner firmly
push blue lever forward
close doors
Not finding what you are looking for?