Top 20 Sansui DTV3200 32" TV Questions & Answers

Hold volume -/+ few seconds, menu will appear. Navigate up/down menu with channel buttons, page change with volume buttons.

Check its color settings, and antenna orientation.

You should have received the codes and directions for the tv with your remote. I just got a new remote and it came with the codes in the manual as well as how to program your tv and other devices.

RCA TVs come with a child lock capability called V-Chip. It's a parental control system which allows you to block programs and films by content, age-based ratings and the ratings which come with the movies. The parental control is a code, sent by the broadcaster to your television. The V-Chip will not work if the broadcaster doesn't send the control, or if the parental controls are switched off or unlocked. The controls are set up in the TV's main menu. The default is off.

Instructions

From the main menu choose "Parental Controls;" it's option six.

Choose the first option, V-Chip TV Rating Limit, and using the arrow keys and the OK button on the remote, scroll through until the TV-MA rating appears. Press the right arrow button to move the highlight over to the "Status" field and toggle to "View." Press the OK button. This will set the age-based ratings to Mature.

From the Parental Controls menu, select the second option, V-Chip Movie Ratings Limit and change the rating to TV_MA and the "Status" to "View."

From the Parental Controls menu select the third option, V-Chip Unrated Program Block and select item one, which will be "View."

Select the fourth option, which is "Channel Block." Highlight the Channel field and using the channel up and down buttons, go through and check they are all set to 'View." Any set to "Block" will need to be toggled back to View. Lock the controls to activate the changes using item six on the "Parental Controls" menu

Tv is missing a color green,recheck ur tv Ant.hole coaxial cable input.Take the cable apart and reconnect to the Ant.hole again see if this help?Not make a fist with ur hand bang on the tv back cover frame see if the color green come back or flashes?Yes,than the tv CRT video board that is connected to the CRT- picture tube have cold soldering joints around it video board connections sockets,require resoldering the socket joints connections between the CRT video board and CRT tube connections socket.U have tools like a soldering iron,a roll of solders and can do basic soldering work?Yes,this problems just require resoldering that it.

Hi,

Power supply board have problems,just not dead yet.Replaced the power supply board,will solved this problems.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.
Hope this helps in solving the problem....Take care.

It may mean that the code you entered is incorrect. Try these: 0135, 0310 and 0394.

Hi


Thanks for using FixYa. Please post a comment with the manufacturers name and model no# of your remote so that I can assist you further.

Thanks
Rylee

fold back means u have to check power supply to v/ ic 25v. if it is ok,,, u have tochange all capacitors in vrtical section,, sometimes feed back resistors may be fauty,,check them also

press menu on ur tv and look for input select if u mess around with ur tv enoughyou will find what ur looking 4 all tvs have a way its just labled diffent

It should hook up like a regular VCR does. A short cable from the OUT on the back of the dvd player to the cable hookup on the back of the tv.

You can also use audio/video wires (3 wire cable). Somewhat same method...connect 3 wires to audio/video OUT of the dvd player to COMPONENT section on the back of the tv. Should be color coded to match colors on the 3 wires.

Hope this helps some. It is difficult to explain. Good luck!

maybe one of your rgb amplifier is loose or deffective

From the menu select auto tune and scan the channels back into memory.

this is a normal behavior if one of the power supply transistors have blown. take the unit to an enlectronics repair. they can either change the transistors affected (usually more than one) or replace the power supply board.

If you have the original remote use the closed caption button to turn it off. Without the remote, hold down both volume buttons on the front of the tv to bring up the menu. Use the the channel and volume buttons to navigate in the menu. Select the center icon at the top of the screen. Go down to closed caption. Select OFF. Wait for menu to go away.

loose connections inside. or cold solder.

Dear,

can u do repairing or have you ever troubleshoot the issue by yourself.
if yes, then open the cover and check the continuety of the power cable because it can be the damage cable. if all of then check the fuse inside the circuit board where the main power cord goes. the must be a glass fuse. Check is it in working condition means having continuty too.
if this component is ok then u have to check the other circuitry.

regards,

SDTV The "D" means 'Defenition' not Digital, S is for 480i. You will need a convertor box. Sorry.....

Take a gun and shoot your self.

There should be a picture size button on the original remote. Press it several times until you find the size you want.