20 Most Recent
Sharp AR-5320 Black and White Copier - Page 2 Questions & Answers
Sharp 5320 H2 error code
Hi,
this is a fuser error message. You must fix the problem causing the fuser to post an error. Then clear the message.
Why ar m201 sharp copier shows error h2 00
it means that the thermistor in the fusing unit is open
which could indicate that it may have become faulty or is because of power fluctuations, a simple crop 14 reset should remove the error, but if it returns it should be looked at by a qualified sharp technichian
I've a problem whith a
Download adriver from support.sharp.net.au and re install your printer with pcl6 driver.
Error code
Hi, H4 is a heater error. Try resetting it by the following; Enter #, interupt, Clear, interupt, display goes dead, enter 14 then print. That will clear the error code, however if you have a problem with the heater it will return. It is probably the thermal fuse has tripped, which is resetable by removing the fuser unit
Regards
Andy
Sharp 5520 f5
Copy lamp error
Replace the power unit.
Check the copy lamp ON with SIM
5-3.
Replace the copy lamp.
Replace the inverter.
Replace the MCU PWB.
How to correct an F5 error?
Copy lamp error, Replace the power unit. Check the copy lamp ON with SIM 5-3. Replace the copy lamp. Replace the inverter. Replace the MCU PWB
Not finding what you are looking for?