Top 20 Toshiba e-Studio163 Copier Questions & Answers

Seems that mainboard or SRAM problem...

Application start error. reinstall the HDD software

There are several error you need to know the sub code by pressing c and 8, frequently you may come across the error code C44,C97,C26 .For C44 the error clearance is "switch on the copier while pressing 0&8 AD will appear enter 400 and press start (print) button and enter "0" and press Interrupt button , switch off and on the machine .If the error code is C97 the main charger to be cleaned in drum unit, If it is C26 you need to check the scanner cable..Hope the anser.

How can I areas the maintenance light on the toshiba e studio 211

0+8> 263> then reset

cause c 45 Thermistor abnormality during printing: Abnormality of the thermistor is detected during printing i think replace thermistor

Address below, hope this helped http://portal-download.com/toshiba/printer-driver-toshiba-e-studio-163-mac

0+8>263> then reset

press start and 9 button simultaneously when power on.In the display LS is blinking type102 and press start button function list will come

the error code means Communication error between copier and PFC.Check cable from pc to printer.

Check the recovery blade next to drum blade .it supposr to clean the excess used toner coming out of the drum. or maybe is the developer D2320 code.

0+8>252="0"

try with e studio 181 universel driver

0-8 pressing and power on machine 251 and press start you see your total copy counter put a number over than this and press interapt button switch off and on again

Check if scrapers are bent, paper size difference,heat roller not rotating.

Your copier has reached it's pre-programmed maintenance cycle. {lease call a qualified Toshiba technician and ask him to change the copy kit and if necessary, the Fuser Roller. He can then reset the maintenance cycle.

help my help......I need ur help F10 or E03 error codes.

f-14 copy count invalid fit 08-389 fit 08-388 cn2 check card connector SRMA or change memory sram

C94Main CPU problem

Check the country code settings.