20 Most Recent Mitsubishi WD-Y57 57" Projection HDTV - Page 4 Questions & Answers

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
https://homenol.blogspot.com/
https://electronicshelponline.blogspot.com/
If blinks continue without any pause, or the LED light stationery; the main board is faulty.
Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. See the site by a desktop. Mobile view has no search box. If you are viewing it by your mobile, see it in webview/

Mitsubishi WD... | Answered on Jul 10, 2018

1 Answer

I have a Mits. WD-73C9 dlp tv. TV comes on with great picture for 30-45 seconds and then shuts off with a solid yellow led light, which means DLP chip overheating. lamp and dlp chip fans are working

Have you checked DLP termistor?

Mitsubishi WD... | Answered on Jan 22, 2018

0 Answers

WD 57831 display

Mitsubishi WD... | Posted on Jan 21, 2018 | Be the first to answer

1 Answer

How to replace the main board on a mitsubishi WD-60C8

Basing the replacement of the board on the clicking sound of a relay trying to close is not a safe bet. The first thing you need to do is check the bulb. Then there is a ballast board and then the Power supply board. Parts might be hard to find. Use the website I listed to see what part numbers are then google it or look on eba or amazon for those parts. Mitsubishi WD 60C8 TV Parts

Mitsubishi WD... | Answered on Jan 18, 2018

0 Answers

Mitsubishi WD 62327. error code 34

Mitsubishi WD... | Posted on Jan 08, 2018 | Be the first to answer

1 Answer

My mitsubishi tv started out with white dots on the screen.eventullay i heard a sizzle and pop and the tv went out. so i did research found that i needed to replace the dlp chip which i did and the la

Most likely a fuse blew when the lamp blew, there is internal fuses on the power supply board on these mitsubishi's, if the fuse is ok though then most likely another component somewhere failed.

Mitsubishi WD... | Answered on Jan 02, 2018

0 Answers

I have a wd-57833 work good I got the same one from some one put in a new lamp tv work for 5 hr then stop working on sound or picture but the lamp is good i put in in my tv and it works so i put the p

Mitsubishi WD... | Posted on Dec 26, 2017 | Be the first to answer

0 Answers

65 inch Mitsubishi dlp 2 years old. Put in a new

Mitsubishi WD... | Posted on Nov 27, 2017 | Be the first to answer

0 Answers

Ws-48511 timer keeps flashing green after power outage. Won't reset.

Mitsubishi WD... | Posted on Sep 09, 2017 | Be the first to answer

0 Answers

My mitsubishi wd 82738 will turn on only if you push the button on the tv it self. Then the volume raises to the loudest it can go. It will only turn down when you hit the volume up button on the tv

Mitsubishi WD... | Posted on Jul 24, 2017 | Be the first to answer

0 Answers

I have a WD-73640 DLP. The lamp went out (blew a

Mitsubishi WD... | Posted on Jun 24, 2017 | Be the first to answer

0 Answers

My mitsubishi wd52327,wd-62327 when powered on

Mitsubishi WD... | Posted on May 22, 2017 | Be the first to answer

1 Answer

Hi guys i have a Mitsubishi WD-65C9 DLP that gives me nothing but a few seconds of audio before shutting off with a blinking red light. ERROR 61

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Mitsubishi WD... | Answered on Mar 27, 2017

0 Answers

Replaced convergence chips on Mitsubishi rear projector TV, turns on, black screen?

Mitsubishi WD... | Posted on Feb 27, 2017 | Be the first to answer

0 Answers

I have a Mitsubishi WD-Y65 that was just turning off this morning after I turned it on. I left it off for a few hours and tried again and this time the red light stayed on. Sound like a bulb issue?

Mitsubishi WD... | Posted on Jan 22, 2017 | Be the first to answer

1 Answer

How do I fix a mitsubishi tv that shuts off and has a steasy red light

Replace your lamp. Make sure its a real Osram bulb and not some cheap knock off. These folks have Osram bulbs and a 6mo warranty. Projector Lamps and TV Lampson Sale ProjectorLamps com stocks Superior...

Mitsubishi WD... | Answered on Sep 30, 2016

1 Answer

What is the correct part# for a DLP: Mitsubishi WD60737 60", Serial#139599 Made June 2009?

If your set worked well (no lines, maybe only white or black scattered pixels) before you replaced the DLP chip, then your problem could be that the DLP chip did not get seated properly or the cam screws were not tightened enough after replacing the chip. The DLP chip must be seated properly in its socket or else line and column lines will be seen. There is also the possibility that the DLP chip is defective or suffered static damage while being handled during the installation. Hope this helps.

Mitsubishi WD... | Answered on Aug 31, 2016

1 Answer

How do I get rid of smudges on WD73642 screen.seems to be right in the glass

Hello. There are three places smudges that are seen in the picture can be found on a projection TV, the lens, the screen, and most likely, the mirror, but none can be discounted. All three can be accessed by removing the bezel and screen assembly. Most of the screws are around the edges from the back, and some are under the flap that hides the front controls. Good luck!

Mitsubishi WD... | Answered on Aug 10, 2016

1 Answer

I replaced a dlp chip in a mitsubishi tv. i now have a band 4" high with vertical bars in it, running across the screen. what is wrong?

Hello. I have replaced many DLP chips, as I work for a repair shop. I have seen similar symptoms when the chip isn't seated properly in the mount. There is a gray screw that should be loosened to remove the chip, and tightened when the new one is installed. Most importantly, you must make sure that the chip is seated flat in the socket before tightening the gray screw. Since you have done it once, you should have no problem correcting the issue! ??

Mitsubishi WD... | Answered on Aug 09, 2016

Not finding what you are looking for?

Popular Tags

70 questions posted

Ask a Question

Usually answered in minutes!

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Mitsubishi WD-Y57 57" Projection HDTV? Or just drag it here!

View Most Popular

WD Mitsubishi

WD Mitsubishi

air flow error message again again

Televison & Video

20 Most Recent Mitsubishi WD-Y57 57" Projection HDTV - Page 4 Questions & Answers

I was just given a Mitsubishi WD-62531 TV and it works great except that...

My tv blinks 6x red and 1x yellow. whats that mean?

I have a Mits. WD-73C9 dlp tv. TV comes on with great picture for 30-45 seconds and then shuts off with a solid yellow led light, which means DLP chip overheating. lamp and dlp chip fans are working

WD 57831 display

How to replace the main board on a mitsubishi WD-60C8

Mitsubishi WD 62327. error code 34

My mitsubishi tv started out with white dots on the screen.eventullay i heard a sizzle and pop and the tv went out. so i did research found that i needed to replace the dlp chip which i did and the la

I have a wd-57833 work good I got the same one from some one put in a new lamp tv work for 5 hr then stop working on sound or picture but the lamp is good i put in in my tv and it works so i put the p

65 inch Mitsubishi dlp 2 years old. Put in a new

Ws-48511 timer keeps flashing green after power outage. Won't reset.

My mitsubishi wd 82738 will turn on only if you push the button on the tv it self. Then the volume raises to the loudest it can go. It will only turn down when you hit the volume up button on the tv

I have a WD-73640 DLP. The lamp went out (blew a

My mitsubishi wd52327,wd-62327 when powered on

Hi guys i have a Mitsubishi WD-65C9 DLP that gives me nothing but a few seconds of audio before shutting off with a blinking red light. ERROR 61

Replaced convergence chips on Mitsubishi rear projector TV, turns on, black screen?

I have a Mitsubishi WD-Y65 that was just turning off this morning after I turned it on. I left it off for a few hours and tried again and this time the red light stayed on. Sound like a bulb issue?

How do I fix a mitsubishi tv that shuts off and has a steasy red light

What is the correct part# for a DLP: Mitsubishi WD60737 60", Serial#139599 Made June 2009?

How do I get rid of smudges on WD73642 screen.seems to be right in the glass

I replaced a dlp chip in a mitsubishi tv. i now have a band 4" high with vertical bars in it, running across the screen. what is wrong?

Not finding what you are looking for?

Popular Tags

Ask a Question

Popular Products

Mitsubishi WD-52525 52" Rear Projection HDTV

Mitsubishi WD-62525 62" Rear Projection HDTV

Mitsubishi WD-62725 62" Rear Projection HDTV-Ready...

Mitsubishi WD-52725 52". Rear Projection HDTV

Mitsubishi WD-60735 Projection Television

Check Out the Latest HD Televisions Report

Top Mitsubishi Televison & Video Experts

matt martin

The Knight

Ekse

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Manuals & User Guides

WD Mitsubishi

air flow error message again again