20 Most Recent Kodak EasyShare Z712 Digital Camera - Page 6 Questions & Answers

Probably shutter button or the shutter itself is defective. Isn't cost effective repairable if at all. There are virtually no parts for Kodak's.

On page 15 of the manual it says:

Also, the newer SD cards may be too fast for your camera. My older DX6340 cannot handle the newer high speed SD cards.

plug it into your comp and take the pics off of it and insert a new sd card

hold upside down and shake

If the icepack caused condense in the camera, the moist can have damaged the electronics. Try drying it in a bag of rice and before you continue, charge the battery. If it does not work, start saving for a new camera. Sorry.

Perhaps you just need a new battery. or the camera is defect. Measure the voltage on the battery with a multi meter. It should give a little more that what is printed on the battery. so when it says 3,7 V on the battery you should measure 3,8 or 3,9. If not, even 3,7 outside the camera is not enough, then you need another battery.

Try using an editing program they usually have a download function. Try FastStone Image Viewer. Free Safe and very useful

No. Download the images from the card onto your computer then from the camera menu use function delete all images on card and you're ready to go again.

On the back of the camera, there is a column of 4 buttons. One is marked with a lightning-bolt-arrow icon. Press that button and you'll see an icon appear on the screen. Press that button again and again until you get an icon with the lightning-bolt-arrow inside a circle-with-a-line-through-it. (What Europeans would call a "no parking" icon, but Americans would call "the Ghostbusters thing.") Here's a better guide: http://resources.kodak.com/support/shtml/en/manuals/urg01202/urg01202c1s1.shtml And here's the whole manual for your camera: http://resources.kodak.com/support/pdf/en/manuals/urg01201/M532_xUG_GLB_en.pdf

Hi there, Try taking the Flash-card out and conect the card to PC and download photo's from there. Hope it helps?. Andy.

you could use an external memory card reader, or you could install the easy share software that came with your camera on a disk, or download it from Kodak (after registering your camera) here: KODAK Support After you installed (and only then) you can connect the camera and the software will allow you not only to down load the pictures, you also can manage them with the software in folders and so on.

You can't get the date in a picture. It is hidden in the exif data and you only can view it with a exif viewer. You could use any photo editor to put the date in the photo then. EXIF Viewer

Usually when somebody that is trying to help you, BTW, it's not only one person, and asked you for more information, is really asking for you to give them just about everything relating to the issue. As an example: What type of batteries does your camera use, some camera use two type of batteries, a regular one like AA or AAA, and a flat battery, usually 1023 or something like that, this is to keep the camera info, and not loosing the time, and set up overtime you turn on the camera . Does it have a memory card? Does it shut off only when reviewing the photos? If you were to put all this info, plus the camera model, we could look into it for you. This is the kind of more information the other person was trying to get. As for the issue, all I can advice is, if it have a memory card take it out and insert it in a computer, so you can see the pictures. Best of luck.

Hi This previous post may have what you are looking for --> Can the Kodak easy share DX4330 shoftware be down loaded Trust this helps, regards Alan

Hi Angelo The troubleshooting guide for your model camera may assist, please click the following link --> KODAK EASYSHARE DX4330 Zoom Digital CameraUser Guide Trust this helps, regards Alan

Hi Angelo Try this site for your software -> All Drivers Free No need to install programs or pay Or the Kodak site shows how to load your photos to your PC without the need for software --> How to transfer pictures from camera to computer without EASYSHARE Software With any downloads I'd recommend that you first confirm that your anti-virus & anti-malware software is up to date Trust this helps, regards Alan

Several possibilities: Battery is defect. Charger is defect. Cable is defect or one of the connectors on the cable, charger or camera is defect or only dirty. Contacts of the battery or in the battery chamber are dirty or oxidised. When you see dirty contacts, clean them (with a dry cloth or cotton swab) if there is dirty in one of the connectors try to blow it out with a bellow. When the battery has died, buy a new one.