20 Most Recent Durabrand DVD-1002 DVD Player - Page 2 Questions & Answers

Try cleaning each disk before playing? Use a lint free cloth and wipe from center to edge of disk. Could be that those dvd's that won't play... won't play and are in fact damaged.

My guess is if you're cable remote has the capability, then great, but if not, you might want to get a universal remote from most department, electronic stores that have that capability. You can program all your devices from one remote.

download the instru manuals and proceed according. gowww.retrevo.com or www.fitness.manualsonline.com God bless you

The red light blinks during charging...when its solid or "off " it indicates a full charge.

Choose connections on the Panasonic that match those on the player--Do you have on the player Component outs(blue,green,red and 2 audio which are red and white? This ought to give you the best picture and sound.Other inputs to the set must match the ones coming from the player--Most owner manuals have a lot of details here.If the player has 1080 output hook to a similar input on the set.Some advice here: make the connections between units with both turned off.

This can be caused by several problems. Sometimes the problem is with burned discs only. In this case, check your burn settings and possibly buy different discs for burning. Sometimes the laser can be dirty. In this case, buy a cleaner from any department store. Lastly, the laser may be having some other issue. In this case, you must replace or repair the unit.

HelloThere are two possibilities for this fault. The first one is with the disc you insert in itself. If the disc is non-compactable to the player, no-disc display will appear after some time. Try with an other good known disc. No-disc display appear for every disc you insert in, the fault will be with its laser pickup assembley. If so it dhould be replaced. It is a skilled job. You must insist on same type and number of laser pickup unit. Chek whether the disc spins inside the player when it is inseted. If not, the sled motor is damaged. It should be replaced. To replace both laser pickup unit, and sled motor, you have to disassemble its mechanism.

Yes it is.