Top 20
Sony KLV-40BX420 40 1080p Full HD Bravia Multi-system PAL NTSC LCD TV - Worldwide Voltage 100-240 Volts Questions & Answers
What could be the problem with my sony bravia klv 40-bx420 lcd flashing red led 2 times
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "
Mosaic" or "Sidebar" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.
How do i fix my sony mhc-gnz888d reject and stand by problem?
The "Eject" and "Standby" display issue on your Sony MHC-GNZ888D could be caused by a variety of factors, ranging from simple glitches to more complex hardware problems. Here are some troubleshooting steps you can try to address the issue:
- Check Power Source and Cables:
- Ensure that the power source and power cables are properly connected and providing a stable power supply to the system.
- Try plugging the Hi-Fi into a different power outlet to rule out any issues with the electrical supply.
- Reset the System:
- Unplug the Hi-Fi from the power source and wait for a few minutes.
- Plug it back in and try turning it on again. This can sometimes reset any minor glitches in the system.
- Remove and Reinsert Discs and Tapes:
- If you have any discs or tapes in the player, remove them and make sure there is nothing obstructing the mechanisms.
- Disconnect External Devices:
- Disconnect any external devices (USB drives, smartphones, etc.) that are connected to the Hi-Fi and try turning it on again.
- Check for Jammed Mechanisms:
- Open the disc tray (if applicable) and visually inspect for any obstructions or jams. Gently remove any foreign objects if you find any.
- Cassette Deck Maintenance:
- If you're not hearing the usual clicking sounds from the cassette deck, there might be an issue with the mechanisms.
- Try opening the cassette compartment and visually inspect the mechanisms for any obstructions or damage. Ensure that the cassette deck is clean and free of debris.
- Cooling and Ventilation:
- Make sure the Hi-Fi has proper ventilation and is not overheating. If it gets too hot, it might automatically go into standby mode.
- Seek Professional Repair:
- If none of the above steps resolve the issue, it's possible that there might be a more serious hardware problem.
- In such cases, it's recommended to contact Sony customer support or a professional audio equipment technician for further diagnosis and repair.
Remember that working with electronic equipment carries inherent risks, and if you're not comfortable or experienced with troubleshooting and repairs, it's best to seek professional assistance to avoid potential damage to the equipment or harm to yourself.
7/30/2023 3:23:51 AM •
Sony Audio...
•
154 views • 0 helpful votes
Not finding what you are looking for?