20 Most Recent
Motorola Mobility Bluetooth Hands Free Headset Wireless Headset - Page 9 Questions & Answers
H371 Password
Its 0000 thats the default password. Good luck and thanks for using FIX YA
5/18/2009 3:56:03 PM •
Motorola...
•
Answered
on May 18, 2009
Motorola H350 User Manual
On your bluetooth headset, hold down the power button until the light stays on steady.
(it will blink when you initially power it on, but continue to hold for
another few seconds for the steady light!) Your headset is now in
pairing mode.
On your RAZR, press Menu > Settings and Tools > Connections > Bluetooth > Handsfree > Look for devices. Your phone will then scan for any bluetooth devices that are in pairing mode. When
your headset pops up on the list, highlight it and press ok to connect.
If the device asks permission to bond with the phone, select yes. It will then prompt you for a pin code. The pin will be 0000 .
5/17/2009 1:18:05 PM •
Motorola...
•
Answered
on May 17, 2009
A new mootrola H375 bluetooth,looking for the
Not to specifically 'activate' the 'phone' but rather to pair up the headset to the new phone, unless it's been specifically changed, the passcode is a simply 4 zeros...that's "0000" w/o the quote marks, of course;)
4/2/2009 11:07:47 PM •
Motorola...
•
Answered
on Apr 02, 2009
Motorola h555
0000 is the standard password on these headsets
3/27/2009 12:36:01 AM •
Motorola...
•
Answered
on Mar 27, 2009
Bluetooth to PS3
I called Motorola tech support. They said that it wasn't their fault and there is nothing they can do, it is a Sony fault. I argued with him for awhile, but to no avail. Goodbye, Motorola.
3/3/2009 6:54:35 AM •
Motorola...
•
Answered
on Mar 03, 2009
I need instructions how to connect my h350 blue tooth to my lg cu400 cell phone
With the headset power off, press and hold
the Call button for 6 to 10 seconds until the
blue indicator light turns on and remains
steadily lit.
Note: The blue light will flash as you press and hold the Call
button. Continue holding down the Call button until the blue
light is steadily lit.
Note: If you let go of the Call button before the blue light is
on and steady, ensure that your headset is off before trying
again.
The default PIN or passkey is 0000 (4 zeros)
You need to enable bluetooth on the phone and go into pairing mode, search for devices or similar
HIH
2/17/2009 5:17:48 AM •
Motorola...
•
Answered
on Feb 17, 2009
HOW TO PAIR MY MOTOROLA
Hi,
If you have lost the pairing on your phone with the headset follow these simple steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Motorola device and click add
6) You will be required to enter in a pass code which is standard ‘0000’.
7) If successful then the headset will start flashing BLUE every few seconds.
8) If it’s a Samsung or Nokia phone you will need to “AUTHORIZE” headset on the device.
• The headset is now paired with the phone
Hope this helps
Chris (ziraffa)
2/9/2009 3:24:21 AM •
Motorola...
•
Answered
on Feb 09, 2009
SAMSUNG BLUETOOTH PAIRING
1.Press and hold the Multifunction button in the middle of a boom headset while the headset is closed. The light will glow blue.
2.Open the boom microphone and the blue light should remain on. If not, repeat step 1.
3.On the cell phone, press Menu > Settings > Connection > Bluetooth > Handsfree > New Device
4.Select (Serched bluetooth device) once a connection is detected.
5.The passkey "0000" is now entered to confirm the connection has been made.
6.The cell phone screen will now read "Bluetooth Connection".
Tips:
1.Provided you set the Bluetooth power to "On" after the initial connection has been made, the phone will automatically re-connect to the headset.
2.To set the Bluetooth power on - Press Menu, Select Settings, then Connections, then Bluetooth link, scroll to Setup and select that. Scroll to Power and chose Change. Scroll to On and press Select. The screen should now read "Changed: Power On".
3.Test Your Connection: Close the headset and watch for cell phone to say "Disconnected". Re-open the headset and the phone should be connected automatically and will now display "Bluetooth Connected".
please give good rating if the solution works.
Thanks for using FixYa.
1/31/2009 9:54:40 AM •
Motorola...
•
Answered
on Jan 31, 2009
Bluetooth problem
1.Press and hold the Multifunction button in the middle of a boom headset while the headset is closed. The light will glow blue.2.Open the boom microphone and the blue light should remain on. If not, repeat step 1.3.On the cell phone, press Menu > Settings > Connection > Bluetooth > Handsfree > New Device
4.Select (serched bluetooth serched device) once a connection is detected.
5.The passkey "0000" is now entered to confirm the connection has been made.
6.The cell phone screen will now read "Bluetooth Connection".
Tips:
1.Provided you set the Bluetooth power to "On" after the initial connection has been made, the phone will automatically re-connect to the headset.
2.To set the Bluetooth power on - Press Menu, Select Settings, then Connections, then Bluetooth link, scroll to Setup and select that. Scroll to Power and chose Change. Scroll to On and press Select. The screen should now read "Changed: Power On".
3.Test Your Connection: Close the headset and watch for cell phone to say "Disconnected". Re-open the headset and the phone should be connected automatically and will now display "Bluetooth Connected".
please give good rating if the solution works.
Thanks for using FixYa.
1/31/2009 9:51:45 AM •
Motorola...
•
Answered
on Jan 31, 2009
Pin
0000
1/30/2009 7:38:50 PM •
Motorola...
•
Answered
on Jan 30, 2009
Getting my head set to pair
1.Press and hold the Multifunction button in the middle of a boom headset while the headset is closed. The light will glow blue.2.Open the boom microphone and the blue light should remain on. If not, repeat step 1.
3.On the cell phone, press Menu > Settings > Connection > Bluetooth > Handsfree > New Device
4.Select your bluetooth (i dont know your bluetooth model no.) once a connection is detected.
5.The passkey "0000" is now entered to confirm the connection has been made.
6.The cell phone screen will now read "Bluetooth Connection".
Tips:
1.Provided you set the Bluetooth power to "On" after the initial connection has been made, the phone will automatically re-connect to the headset.
2.To set the Bluetooth power on - Press Menu, Select Settings, then Connections, then Bluetooth link, scroll to Setup and select that. Scroll to Power and chose Change. Scroll to On and press Select. The screen should now read "Changed: Power On".
3.Test Your Connection: Close the headset and watch for cell phone to say "Disconnected". Re-open the headset and the phone should be connected automatically and will now display "Bluetooth Connected".
please give good rating if the solution works.
Thanks for using FixYa.
1/22/2009 12:10:17 PM •
Motorola...
•
Answered
on Jan 22, 2009
Volume problem
there should be a volume button on your bluetooth, or you have turned your volume down on your phone, which is most likely, thats what i had done, crazy huh.
1/11/2009 8:54:56 PM •
Motorola...
•
Answered
on Jan 11, 2009
Sony Ericsson not recognising motorola n356 headset re bluetooth.
Hi,
If you have lost the pairing on your phone with the headset follow these simple steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Motorola device and click add
6) You will be required to enter in a pass code which is standard ‘0000’.
7) If successful then the headset will start flashing BLUE every few seconds.
8) If it’s a Samsung or Nokia phone you will need to “AUTHORIZE” headset on the device.
• The headset is now paired with the phone
Hope this helps
Chris (ziraffa)
1/9/2009 1:17:52 AM •
Motorola...
•
Answered
on Jan 09, 2009
Not finding what you are looking for?