20 Most Recent Symbol MC9090 Barcode Scanner Questions & Answers

This is application dependant. The Motorola Datawedge does have this function and so does some diagnostic software, but each application would need to have the functionality written for it.

If you need any more help then please do not hesitate to contact us:-

[email protected] or TEL +44(0)1202 620955

http://www.biastechnology.com/

You can make your profile cold boot persistent by following these steps. Create the profile. Once saved click on your wireless icon and select options. Scroll down to export. Select the export all profiles and press ok to finish creating the .reg file. Tech Support Barcoding Technical Support

Most likely you need to download and install Datawedge. See here for solution. Symbol Motorola MC9090 Will Not Scan

The scanner engine/output can be used only by one application. If a second application is trying to access the scanner, while in use. The error message will come.
Please check if there are more applications running in background. Usual MC9090 applications with scanner drivers are Telnet, Datawedge, Rapid Deployment and custom software. Exit one of the application or try to exit all of them. Start your scanning application again, no error should appear now.

You may need to replace the scan engine - I can help you out with this (or any other issues you may be having).
Contact me if you need anything:
Ian
DC Solutions
[email protected]

Check wlan antenas inside unit

Download ScanSamp2.exe and upload it on your device via USB (Activesync) or via SD card and start it.

Contact Zebra Support Downloads Mark Motorola Support

only with another mainboard. I have used 2

Cesar Contact Motorola Solutions Get Support or Zebra Technologies Support Downloads. They aren't helping on FixYa yet so it is best to reach out directly. Mark Motorola Mobility Support