Top 20
RCA RCR311B Remote Control - Page 9 Questions & Answers
I cannot program my remote
Try this:
Go to this link to download a PDF manual for your remote. Just follow
the directions to download. Save to a file on your computer and you'll
be able to view it.
http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man
Hope this helps, let me know if I can help you with anything else.
JimmyC
Trying to hook up remote to sanyo tv
On most universal remote control, you will find the procedure to enter
the builder code OR a procedure to pass through all the code of the
remote, one by one and pass to the other TILL you find the right one.
It happen to me numbers of time because all my family ask me to do
this...
Caption code for 32" 1997 panasonic tv
Hi
1012, 1021, 1144, 1146, 1154, 1163, 1164, 1167, 1211, 1270, 1273, 2383.
Regards
Phillip
How search for my tv code
Go to this link to download a PDF manual for your remote. Just follow
the directions to download. Save to a file on your computer and you'll
be able to view it.
http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man
Hope this helps, let me know if I can help you with anything else.
JimmyC
How do I prorm this remote?
Try this:
Go to this link to download a PDF manual for your remote. Just followthe directions to download. Save to a file on your computer and you'llbe able to view it.
http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man
Hope this helps, let me know if I can help you with anything else.
JimmyC
How do I program my remote? Is there a manuel
Go to this link to download a PDF manual for your remote. Just follow the directions to download. Save to a file on your computer and you'll be able to view it.
http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man
Hope this helps, let me know if I can help you with anything else.
JimmyC
I have a rca 311 w to program into a sanyo tv
Code For Model RCR311W
Code 1004 for Sanyo TV
Code 1048 for Sanyo TV
Code 1049 for Sanyo TV
Code 1073 for Sanyo TV
Code 1080 for Sanyo TV
Code 1162 for Sanyo TV
Code 1169 for Sanyo TV
Code 1180 for Sanyo TV
I need code for RC312W remote to use on Goldstar TV
Hi
1021, 1016, 1026, 1049, 1051, 1052, 1082, 1091, 1098, 1132, 1141, 1157, 1158, 1175, 1203, 1206, 1217, 1225, 1231, 1258, 1274, 1275, 1288, 1347, 1355.
Regards
Phillip
I do not have my paper work anymore so i went
- These instructions come from the RCA website. The crucial step is to keep pressing the reverse button.
- Turn on the component (the tv, dvd, etc).
- Hold the TV (or DVD) button and the on/off button at the same time until the on/ff button remains lit.
- Press the play button every five seconds until the component turns off.
- Each time the Play button is pressed, the illuminated ON-OFF button blinks ten times and a block of 10 codes is sent to your component. This process continues until all the codes in the Code Lists have been searched. If the component has not turned off after all codes have been searched, the illuminated ON-OFF button blinks four times, turns off, and the Auto Code Search Entry method is exited.
- When the component turns off, press and release the REVERSE button, then wait two seconds to see if the component turns on again.
- If the component does not respond, continue to press the REVERSE button EVERY TWO SECONDS UNTIL THE COMPONENT TURNS ON again. This will isolate the correct code in the last block of codes sent. Each time the REVERSE button is pressed, the illuminated ON-OFF button blinks.
- If the REVERSE button is accidentally pressed after the component responds, press and release the FORWARD button. Wait two seconds to see if the component turns off again.
- To save the new code, press and release the STOP button.
- The illuminated ON-OFF button turns off. You must press the STOP button to save the code.
To Enter Code
Manually turn on the component you want the remote to control (TV, VCR, DVD, satellite receiver or cable box). 2. Press and hold the component key (TV, VCR•DVD, SAT•CBL) you wish to program. The illuminated ON•OFF key turns on and remains on. If you release the component key at any time during the Direct Code Entry procedure, the illuminated ON•OFF key blinks four times, and the process is exited. 3.While holding down the component key, enter the four-digit code While you are pressing the numbers, the illuminated ON•OFF key turns off. 4.After the fourth number is entered,the illuminated ON•OFF key turns on. At this time, release the component key. If the illuminated ON•OFF key turns off, you have entered a valid code and have followed the correct procedure for Direct Code Entry. If you enter a code number that is not in the Code Lists or you do not follow all of the steps for Direct Code Entry, the illuminated ON•OFF key blinks four times when the component key is released. This is an indication that a programming error has occurred. In that case, repeat the Direct Code Entry process from step 2 and try the next code listed.
Lost dtv rca remote
Here is the website for manuals>
http://tv.rca.com/en-us/productdownloads.html
You will have to search for the TV model to find the instructions of the remote...
If I helped please vote...
Not finding what you are looking for?