20 Most Recent
Nokia 3230 Cellular Phone - Page 4 Questions & Answers
Nokia 3230 white display and
Hope your file has been corrupted like VIRUS and so on...
So need to refer to the nearest mobile service centre for FLASHING.
Thanks for using FixYa
Good Luck
I am facing a problam
Format your mobile with ufs. If the problem exist there, then flash it If it again shows the problem then go to a mobile repairing shop because its lcd or display ic may be found faulty.
Don't forget me on fixya.com, Thanks
N3230 poor signal
open your handset and wash antina pad with white petrol your problem will be gone 100%...
My Phone switch is damaged
If you are not a Technician or if you have no knowledge about mobile and how to repair it, you'll not be able to replace it. There are two switches for Power, one at the outside and one in the inside is which directly connected to the phone's motherboard. If the outer button is damaged, you'll need to replace it, but the thing is that you have to replace it with the suitable or compatible power button. But if it's the inner switch, you'll need to solder it on the mainboard. This is to be done only by certified/experienced technician. There are mainly three types of power switches for Nokia mobile, when you ask for power switches at the mobile spares shop, they will give you the compatible switch for your Mobile depending on the model.
Let me know if you need further help.
Good Luck.
Thanks for using FixYa.
I have a problem with my NOKIA 3230. That z PHONE
Hi Hello your problem to your cellphone is contact retailer, try to my advice yyou need to check you network thru wireless center or you need to reprogram your cellphone thru using software reprogram.you need to check up the service repair.thanks and god bless.
When I switch my Nokia
you can try resetting your phone through codes. its the safe way to
reset your phone. because when you reset your phone through software or
hardware there are possibilities for data getting corrupted or lost.
but there is no such possibilities when you reset through codes. thats y
i prefer this method to reset my phone. i got the codes from this site
Unlockfree.com to reset my phone. try it
My sim is not active to gprs
Hi,
GPRS setting depend on the network you are using. In Nigeria, MTN GPRS setting is given below
For your Nokia phone, the basic setttings are these;
GPRS/WAP Settings
Account Name = MTN GPRS or any other name
IP Address = 10.199.212.2
Port = 9201 (for WAP) or 8080 (for HTML )
Username = web
Password = web
Access Point Name (APN) = web.gprs.mtnnigeria.net
So, please contact your service provider to give you your GPRS Setting.
Regards
How can i set my
dear friend, it just a simple ques.. Go to msgs .,open the option..then go to settings and select other then you can see memory in use select mmc. Then your problem is solved.,now your bt msgs saved on mmc.
My phone headset was activated
try to clean the headset jack on your phone. it is supposed to activate and deactivate automatically when headset is in or out.. so something is stuck.
Why? back to start up failed my phone?
It is possible that the phone has hung up because there are errors in the software. So to reset remove the battery and the memory card from the phone. Using your PC , scan the memory card for any corrupt files or media files with virus- it is possible when they are downloaded from unsafe sites. If so remove or format the card. Now replace the card and battery and switch on the phone. If the phone hangs up then it is confirmed that the software is corrupt and will need a reinstallation. Seeking help from the authorized service /support centre is most ideal. Take estimate and decide.
N70 ime 359381004540002 unlock key
Hello Sir
plz follow these steps.
1. Download smartmovie converter from here
http://keygens.nl/crack/127482/
2. extract it and from CONVERTER folder click on setup and then install it in your computer.
3. now from PLAYER folder copy sis file format into your computer (it is also setup but not for computer but for your mobile)
4. after copying it to your mobile install the software in your mobile and then open it.
5. From your computer open Smartmovie there you will find a code as ( REQUEST CODE TYPE THIS ON MOBILE DEVICE)
6. Enter that code in your mobile and your mobile will generate an UNLOCK code :)
dnt forget to rate and vote click YES if it was helpful :)
THanks
Update software
If you can do my trick,,,,,,,,,,,,,,this is the best ....but if you can't do contact me at
[email protected].
First download and install
Pheonix. Nokia
Phoenix Service Software 2011 - Download secondly Download flash file from this link Nokia flash file or 6300 file and install it to C / programme
files/pheonix..after finished this installation open pheonix Inside the interface at the> left top <there you see
"File" click there and choose "open file" and
then select the approprait Product type i.e"which is written in the
back banel inside the battery of every Nokia(Type RM-000).After doing
this again at the left top count from "File"1..2..3..the 4th one is
"Flashing" press there when you click there you'll see three
icon just select the "Firmware Update" again you'll see
another interface.Look at the product code there should be blank and put your
"mouse tool" at the straight end from the "Product Code"
there is a Botton and choose the code which is written in the
back side of your phone.e.g CODE:0000000.if the same code does not found
just take one.After this you can see "Dead phone USB flashing"
click that box.Now this is the last stage... Connect your phone with the USB
to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just
finished (In case your phone is Dead,unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish"
after this, a message will prompt you "press power botton"
press it and wait untill the phone will Restart automaticlly in normal mode
10-15 minutes.If you cannot understand just make a Reply thanks for
visiting fixya.Good luck
Not finding what you are looking for?