Top 20 Westinghouse 16093 Remote Control Questions & Answers

follow this instruction and fix it. God bless you No picture

1. Make sure all power cords are connected.
2. Try pressing the enter/play key.
3. Make sure the TV is turned on and the input is set properly.
4. Make sure the TV source is set properly on the TV (This is probably done on the screen; Check your TV manual).

WESTINGHOUSE 0143 0114 WHITE WESTINGHOUSE 0100 0130 0138 0136 0227 0279 0080

10060 is the code that worked for my westinghouse and Direct TV

There is a method called a Power Scan this method allows you to search for all possible codes. Try this until you reach a code that carries all of the functions desired. If the TV mode button starts flashing rapidly during this process you have exhausted all possible codes.
Power Scan
1.) Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
2.) Hold down the clear "TV" button on the remote for four seconds, press the big power button once.
3.) Press the channel up button once per second until the TV turns off then press pound (#).

Daniel Busa
DISH Network
Customer Service

Hello! I wanted to give you a few more codes that you may not have tried. I also wanted to give you the instructions to the power scan, which will scan the TV for the correct code. I hoep this helps!

Codes:
500
795
719

Power Scan:
1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.


Becki Barned
DISH Network Customer Service

http://westinghousedigital.com/wordpress/wp-content/uploads/2010/05/Remote-Codes.pdf

This link will take you to the user manual.
http://www.universalremote.com/resources/pdfs/UR5U-8700L_8720L.pdf

Hello, this is Becki Barned, with DISH Network customer service. Here are some codes that you can try, and also the instructions again for a power scan. Go ahead and try them again, and let me know if you have any more troubles. You can email me at [email protected]. I hope this helps.

http://www.dishnetwork.com/SupportSection/power-scan-instructions : power scan instructions

Codes: 500 795 829 630 631 659 try these and let me know!!!!!


Becki Barned
DISH Network Customer Service

Hello mwhinz, there are currently no codes set up for your TV, what you will need to do is call 1-800-701-0680 or send me a quick email to [email protected] to get the FW via email that will allow you to program your remote using different codes other than Westinghouse codes. Please make sure you include the model #, serial #, and TW # all located on the back of the TV. Please rate my answer if it was helpful.

Try this method it's called a power scan if this doesn't work you have a compatibility issue. Hope this helps!
http://www.dishnetwork.com/SupportSection/power-scan-instructions


Daniel Busa
DISH Network Customer Service

Need the firmware update and the codes still do not work... About ~ 40 scans in and my vr-4085 worked. Tried all codes prior. No luck.This works on rc-65There is no other setup code indicated for your productthat links to the model number you entered.You may still find a setup code that works for your device by stepping through the library codes in your remote. The following instructions will help you do this.

StepNSet

• Set the "Mode Switch" to the desired mode such as TV for a Television.
• Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
• Enter the code "991" followed by the "device number"
  • 1 for Televisions
  • 2 for "AUX 1" devices - VCRs or DVDs
  • 3 for "AUX 2" devices - Audio
• You can step through the setup codes for this mode by pressing the "Channel Up" key to go forward through the codes or pressing the "Channel Down" key to go back to the previous codes.
• You can try out each code by pressing one or more function keys such as power, volume or digit keys.
• When you've found the setup code that works for your device, press the "Select" key.

Yes,it shorted the remote.Replaced it with the new one,but make sure also check ur wiring in the fan to see it clean and dries or could short out the whole house,and cause fire.

Try these codes listed for Sony.  10080 11100 10111
 One of these should work.

DirecTV offers a remote code lookup tool, which I just used to find possible codes for my Westinghouse TX-42F430S; its first suggestion (the "most popular" code) didn't work. Clicking the "It's not here" button showed seven more codes, and one of them (11577) worked perfectly. Here is the full list of Westinghouse codes for DirecTV from that tool (as of 11/27/08):

Most Popular Code: 10885

Other Possible Codes: 10889 10890 11577 11282 10451 10000 11092

make sure that you have the power cord on the fan in the right position. Pull it once to see if that starts the motor. Then go back to your remote and try starting the fan from the remote.

The are two types of code. One to activate the television, or a Universal remote code. FYI, no one uses Universal Remotes in 2023/2024. https://www.google.com/search?q=activation+code+for+westinghouse+tv+remote https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote ..

Be sure to manually turn on the device you wish to control. Press. And hold the setup button until the red indicator light remains on and then release the button. Press.

Only 1 left!

Westinghouse B20 1632CG 200 Amp 120/240V 1 Phase 3 ...

S&S Electrical Supply https://www.sselectricalsupply.com > en-ca > products Westinghouse B20 1632CG 200 Amp 120/240V 1 Phase 3 Wire Indoor Enclosure 22 Space 28" x 15". Save 0. Westinghouse. filler. 1 In Stock / 0 Sold. Style: Used.

Yes, you can reset your old Westinghouse smart TV by using reset codes. The specific code you need may vary depending on the model of your TV. Here are some general steps you can follow to reset your Westinghouse smart TV using reset codes:

1. Press the power button on your TV to turn it on.
2. Using your TV remote, press the "Menu" button and navigate to the "Setup" or "Settings" menu.
3. Look for the "Reset" option and select it.
4. Enter the reset code for your TV when prompted. The reset code may be a sequence of numbers or a combination of buttons on the remote control.
5. Follow the on-screen instructions to complete the reset process.

If you don't know the reset code for your Westinghouse smart TV, you can usually find it in the user manual or by contacting Westinghouse customer support. Keep in mind that resetting your TV will erase all custom settings and restore the TV to its factory default settings

A model would have been beneficial, guessing you have half the LED strips not lighting but it's just a guess without the model