20 Most Recent
Whirlpool Calypso GVW9959K Top Load Washer - Page 3 Questions & Answers
How to remove the wash dome
Hello James;
My name is Peter. I am a retired field service appliance technician.
On the bottom of the dome are 4 clips that you must push in on. Be careful not to damage the seal ring.
12/8/2014 6:16:34 PM •
Whirlpool...
•
Answered
on Dec 08, 2014
Schematic diagrams
8272124 that's part number for lid switch. Amazon I'm sure has it.as far as schematic . There's one taped to inside front of cabinet. Or visit whirlpool.com under customer service heading is a link to manuals
8/27/2014 4:14:11 AM •
Whirlpool...
•
Answered
on Aug 27, 2014
Is the schematic for 8520870 control board available
there would be a wire diagram , which should include a schematic of the board and check points either within the console, or i believe on this unit its located in a clear plastice bag glued to the inside of the front panel, tip the machine back you sould be able to reach up and remove it that way
8/3/2014 4:59:25 PM •
Whirlpool...
•
Answered
on Aug 03, 2014
Washer wiring diagram
It will be some where, try google, try espares.co.uk they are good for things like that, use them a lot.
7/29/2014 6:53:11 PM •
Whirlpool...
•
Answered
on Jul 29, 2014
Control board
Call the manufacturer or get a multimeter to check things manually
7/29/2014 5:08:51 PM •
Whirlpool...
•
Answered
on Jul 29, 2014
What is era Code CI on a Calypso washer
A CI is an to high amp draw on the motor. In my experience it could mean your motor is bad, or motor control board is at issue. The only way to really check is to have an amp meter to see if the motor is drawing to many amps.
285917 MOTOR ABOUT $250
8571359 CONTROL BOARD ABOUT $200.
The biggest issue, is you may also have a transmission locking up, basket drive issues, bearing issues, etc causing the motor to pull the high amps.
6/5/2014 8:09:15 PM •
Whirlpool...
•
Answered
on Jun 05, 2014
Not finding what you are looking for?