Brother DCP 115C All-In-One InkJet Printer - Answered Questions & Fixed issues
BROTHER MFC 5840cn MACHINE ERROR 4F
Downloaded service & repair manual for brother mfc 5840CW- my unit. Will follow repair directions to check the memory then replace required parts. Will be cheaper and faster than finding a repair shop and paying as much as the macine to fix it! Rip off prices for repairs today on units so they can get you to leave them and buy a new one. Then they fix the unit and sell it "refurbished"- not mine!
Your information on clearing memory, the ink cleaning codes and taping the cartridge from over cleaning was good. Thanks for the help!
Brother dcp115c unable to print error
High probability it is a waste ink count or "error 46" code fault. There are purge count reset codes available on line, but you should also remove and clean out the waste ink chamber. It is a messy job and given the age of the machine, you may be better off replacing it
Printing too small
Go to file print preview and at the top of the screen that pops up there is a place where you can bring up a drop down list which lets you choose shrink to fit as well as a wide variety of percentage increase or decrease if this doesn't help go to file>Print>anthen click on preferences on the screen that comes up check your printers settings don't forget to look at what size paper the printer thinks you are using and see if your printer has settings for how many pages to fit the document to.
Still having Problem Then follow Us For
Brother Printer Support
Unable to init see troubleshooting and routine maintenance chapter in user's guide.
1. Check for foreign objects, such as a paper clip or scrap of paper, inside the machine.
Disconnect the machine from the power outlet and open the scanner cover by pulling up on the lower right corner of the cover. Look inside the machine and remove any foreign objects. If you see jammed paper or another item inside this area, gently pull it out and then close the scanner cover securely.
2. If the error continues to appear, move the print head and examine under the print head.
NOTE : The images shown below are from the representative product and may differ from your Brother machine.
2-1.Disconnect the Brother machine from the poweroutlet.
2-2.Open the scanner cover by pulling up on the lower right corner of the cover.
2-3.Check the print head's position.
In the example photo the print head is positioned at the left hand side of the platen area.
2-4.Gently move the print head to the center.
Examine under the print head. If anything is found, remove it.
Close the cover and reconnect the machine to the power outlet.
Brother 115C printer says no ink when plenty.
i bought new inks and inserted them , when in fact its only the yellow inks is empty yet it sends me message that found no cartridges.. waah. this printer been with me for 8 years and had it clean last year only.. what to do?
Installation of HL 5450DN
http://welcome.solutions.brother.com/bsc/public/eu/eu_ot/en/doc/manual_index.html?reg=eu&c=eu_ot&lang=en&prod=hl5450dn_all&type2=-1&flang=English&dlid=
Xp driver download
On the Brother Solutions Center (English US) your All in One is not listed. Maybe on some other country or region?
Here is the link to the main page, choose your country and find driver.And again explicit this timehttp://solutions.brother.com/
Not finding what you are looking for?