Top 10 Brother DCP 115C All-In-One InkJet Printer Questions & Answers

press menu then start b/k-copy (mono) then fortimes arrow up button quickly after another. machine will switch to mainteance mode. press start bk copy.
What two digit error code does the machine display?
Post here again.

Pls refer below to clear the "Unable to Clean" error:

1. Enter MAINTENANCE MODE: Press MENU, MONO START 4x on ARROW UP within 2-3 sec
2. Using the ARROW UP botton, press botton and wait for the ff #:
a. 8 then press SET
b. 0 then press SET
3. Using the MONO START, just press until the word "PURGE XXXXX" comes out
4. Using the ARROW UP botton, press botton and wait for the ff #:
a. 2 then press SET
b. 7 then press SET
c. 8 then press SET
d. 3 then press SET
e. Press Stop/Exit
(This is to reset the purge counter)
5. Using the ARROW UP botton, press botton and wait for the ff # to appear:
a. 0 then press SET
b. 1 then press SET (to reset unit)
c. 9 then press SET
d. 9 then press SET (to exit maintenance mode)

If after this procedure you still encounter problem, see your service center
Hope this will solve your problem "unable to clean".

epc.

if u replace ink manually, the priter may no longer work. bcoz bubbles will damage the cartage. thak you

you need a new waist ink absorber box from a service partner which can be found at brother homepage of you country.
After replacing the box you have to do a reset.

search error 46 or unable to clean here in the forum. it has been written many times.

This is a link to the Brother website
You will need to select OS sys, Language etc

Machine error 36
**Head/carriage unit travel error***

Try to find any obstacles on the travel path of the head/carriage unit. If you cannot find, next steps are:

- Replace the carriage PCB.
- Replace the head/carriage unit.
- Replace the CR encoder strip.
- Replace the carriage motor.
- Replace the main PCB.
- Replace the power supply PCB.
- Replace the maintenance unit.

Here is some great PRINTER solution by Some FIXYA EXPERT.
Get any kinds of PRINTER solution from bellow.

» Lexmark Printer Solution

» Epson Printer Solution

» Brother Printer Solution

» Dell Printer Solution

» Canon Printer Solution

» HP Printer Solution

» Kodak Printer Solution

16

carriage PCB on print head or main PCB defective

Machine error 50 is a error in Purge unit.You can't fix it by yourself and your printer need service.In most case the cost of repair is more than cost of new printer.