20 Most Recent Whirlpool AWM9000 Front Load Washer Questions & Answers

Hello mi_wilk64,
If you still need assistance with this concern, please reach out to us, we have a local rep for you to speak with, here is our link: http://www.whirlpool.eu/
Thank you Whirlpool Social Media

Whirlpool... | Answered on Oct 18, 2017

We're very sorry to learn of your concerns regarding your Whirlpool® Washer. We would like to inquire further about your review with you. Please respond back to this email address Whirlpool_Reviews@Whirlpool.com with your Reviewer ID, the name of the site you were contacted on (fixya.com), name, phone number, street address, zip code, model & serial number, and date of purchase on the appliance. Please include a brief description of your concerns in your email. Thank you.

Whirlpool... | Answered on Sep 12, 2017

F 21 means slow drain if you can here the pump that means something pluging it. remove lower kick plate . the pump will be there remove cleanout counter clockwise turn .put back together.. hope this helps...good luck

Whirlpool... | Answered on Dec 21, 2014

Not a problem glad we could help.

Whirlpool... | Answered on Mar 15, 2014

FH means there is No Water or that's what it thinks.
You either have a water problem or a faulty water valve.
Hope this helps

Whirlpool... | Answered on Sep 03, 2013

The Control Lock prevents unintended use of the washer. You can also use the control lock feature to prevent unintended cycle or option changes during a cycle. When CONTROL LOCKED is lit, all buttons are disabled except for Pause/Cancel and Start. You can lock the controls while the washer is operating. To lock the controls: Select and hold DRAIN & SPIN for 3 seconds. The CONTROL LOCKED status light glows. To unlock the controls: Select and hold DRAIN & SPIN for 3 seconds or until the CONTROL LOCKED Status light turns off.

Whirlpool... | Answered on May 25, 2013

I am not aware of any washers that have built in heaters. Your problem seems to be with your hot water supply in the house. If you have a hot water heater gas or propane pilot may be out, or electric possibly tripped curciut breaker, or if furnace coil , possible furnace servicing is required. Did you just have new machine installed? Did installer forget to turn on the hot water? Basically before you get to upset go backwards from the machine to the problem. It will turn out to be an oversight due to the excitement with your new machine. Enjoy, and GOOD LUCK.

Whirlpool... | Answered on Sep 24, 2011

Not finding what you are looking for?
Whirlpool AWM9000 Front Load Washer Logo

61 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts


Level 3 Expert

85216 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers


Level 3 Expert

411 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Whirlpool Washing Machines

  • Whirlpool Washing Machines

Most Popular Question

maytag washer 9000 series

  • Washing Machines