LG WT4801CW Top Load Washers - Page 2 - Answered Questions & Fixed issues
How can I load my LG washing machine?
To load your LG washing machine, open the door of the machine, and place your laundry inside, close the door securely, and follow the machine's user manual for specific instructions on turning it on from the manual book.
6/22/2023 9:37:47 AM •
LG Washing...
•
Answered
on Jun 22, 2023
•
25 views
LG Inverter direct drive won't finish spinning
It could be from a load that is not balanced.Or the drain filer might be clogged and full of debris and needs to be cleaned out. Also the drain hose maybe be kinked or twisted too.
5/12/2023 6:05:53 AM •
LG Washing...
•
Answered
on May 12, 2023
•
52 views
Transport bolts left in on first spin cycle very briefly
It will be fine. The transit bolts are there to protect the springs and dampers from stretching if the machine is tilted or laid on its back during shipping to the seller and delivery to the home.
In use with the transit bolts removed it allow the springs, the shock absorber and the big concrete block to absorb movement as the spin evens out the balance of the clothes with the first part of the spin. It also stops the machine walking across the floor as all of the movement is transferred to to case and feet.
It will be fine, I have done it myself after I moved from one house to another and then didn't do any washing for a week or two.
Enjoy your new machine. Finally, just for fun
3/9/2023 6:31:38 PM •
LG Washing...
•
Answered
on Mar 09, 2023
•
640 views
I had order a new
http://manuals.appliancesonline.com.au/lg-frontload-washers/lg_frontload_washers_user_guide.pdf
3/9/2023 2:38:59 PM •
LG Washing...
•
Answered
on Mar 09, 2023
•
377 views
My LG direct drive washing machine Gear system is broken. Same issue when I replaced it. Checked clutch regulate motor and work fine.
If the gear system of your LG direct drive washing machine is broken even after you have replaced it and checked the clutch regulate motor, there could be a few other reasons why this is happening. Here are some possible solutions to try:
- Check the motor: If the gear system is still not working, it could be a problem with the motor. Check if the motor is functioning properly and if it is getting power.
- Check the control board: The control board could also be a potential issue. Check if the control board is functioning properly and if any of the connections are loose or damaged.
- Check the drum bearings: The drum bearings may be worn out, causing the gear system to malfunction. Check if the drum bearings are in good condition or if they need to be replaced.
- Check the pulley: The pulley may be worn out or damaged, causing the gear system to malfunction. Check if the pulley is in good condition and if it is properly aligned.
If none of these solutions work, it may be a more serious issue with the washing machine that requires professional repair. In that case, you may need to contact LG customer support or a qualified technician for assistance.
2/25/2023 6:14:20 PM •
LG Washing...
•
Answered
on Feb 25, 2023
•
195 views
My LG top load washing machines WF -T8019TC show an error code E2
The E2 error code on an LG washing machine usually indicates a problem with the water supply. Here are some steps you can try to resolve the issue:
- Check the water supply: Make sure that the water supply to the washing machine is turned on and the water pressure is adequate. If there is a problem with the water supply, fix it and try running the machine again.
- Check the water inlet valve: The water inlet valve is responsible for controlling the water flow into the washing machine. If the valve is faulty, it can cause the E2 error code. To check the valve, unplug the machine and turn off the water supply. Remove the hoses from the valve and check if there is any debris or damage. If the valve is damaged, it will need to be replaced.
- Check the water level sensor: The water level sensor is responsible for detecting the water level in the washing machine. If it is faulty, it can cause the E2 error code. To check the sensor, unplug the machine and locate the water level sensor. Check for any damage or debris and clean it. If the sensor is damaged, it will need to be replaced.
If the above steps do not resolve the issue, you may need to contact a professional for further assistance.
2/24/2023 10:16:52 PM •
LG Washing...
•
Answered
on Feb 24, 2023
•
237 views
Lg front loader m 80490 cl clear error
If you're experiencing an error on your LG front loader M80490CL washing machine, here are some steps you can try to clear the error:
- Power off the washing machine by unplugging it or turning off the circuit breaker that powers it.
- Wait for a few minutes to let the washing machine cool down.
- Press and hold the "Start/Pause" button for about five seconds.
- While still holding the "Start/Pause" button, turn on the washing machine by either plugging it back in or turning the circuit breaker back on.
- Release the "Start/Pause" button once the washing machine begins to beep and the display shows "CL" to indicate that the error has been cleared.
- If the error persists, refer to the troubleshooting section of the washing machine's user manual or contact LG customer support for further assistance.
2/24/2023 4:35:04 AM •
LG Washing...
•
Answered
on Feb 24, 2023
•
104 views
Do LG front loaders have oil the motor?
This seems to be a very strange "Assessment". There is nothing on or inside a front loader washing machine that contains Oil. The motor is also tucked inside the machine often where it is difficult to get to. There will be small amounts of grease on the drum and motor bearings but not enough to affect other machine parts. I would suggest you get a second opinion from another good repairer.
LG will claim that this damage was not due to a part failing so it will not be covered by a warranty or guarantee. This will be see as damage being done 'on purpose' so it's not their problem.
1/23/2023 9:27:51 AM •
LG Washing...
•
Answered
on Jan 23, 2023
•
135 views
Not finding what you are looking for?