OKI MICROLINE® 390 FB Printer - Answered Questions & Fixed issues
Oki microline 390fb alarm blinking,
There are a few things that are possibly wrong with your printer. You may want to try completely unplugging and reinserting the cord into the power outlet. If that doesn't work, check your printers ink levels and ensure that there is no paper jam. Best of luck.
Oki microline 280 eco jumps around .75" for each new page
There could be a few possible reasons why your Okidata Microline 280 Eco printer is jumping around 0.75" for each new page. Here are some things to check:
- Check the paper feed mechanism: Make sure the paper is feeding correctly through the printer and that the paper guide is properly aligned. If the paper is not being fed correctly, it can cause the printer to jump around.
- Check the tractor feed mechanism: The tractor feed mechanism may not be gripping the paper correctly, causing it to feed inconsistently. Make sure the tractor feed mechanism is properly aligned and tightened.
- Check the page length settings: Double-check that the page length settings are correct and that they match the size of the paper you are using. If the settings are incorrect, the printer may not be able to print the entire page and may skip to the next page prematurely.
- Check the top of form settings: Make sure the top of form is set correctly and is not too close to the top of the page. If it is too close, it may cause the printer to jump around.
- Check the print head alignment: If the print head is not aligned correctly, it can cause the printer to jump around. Check the print head alignment and adjust it if necessary.
If none of these steps resolve the issue, it may be a hardware problem with the printer itself. In that case, you may need to contact Okidata technical support for further assistance or consider taking the printer to a professional repair shop.
2/26/2023 3:25:10 PM •
OKI Office...
•
Answered
on Feb 26, 2023
•
53 views
What is 811 error?
You cannot repair this error easily. Most times its the main board that has the problem but its more than likely to be the scanner pcb than the main board. I am actually in the middle of the very same error and have tried the main board and it is the scanner pcb that is causing this particular problem. As you do not state what model you have , I cannot give you a part number.
12/22/2022 1:47:55 AM •
OKI Office...
•
Answered
on Dec 22, 2022
•
747 views
How to solve oki error code 994
Hi,
I believe that this is a high-temperature error. so, you might need to move the printer to a cooler room or lower the temperature of the room that the printer is in.
Thank you.
10/27/2022 7:22:25 PM •
OKI Office...
•
Answered
on Oct 27, 2022
•
127 views
Not finding what you are looking for?