20 Most Recent
Lexmark Z640 InkJet Printer - Page 4 Questions & Answers
How to install lexmark printer Z640
You can find driver software and instructions for the z640 here. You will have to click on the Downloads tab, and select the appropriate file for your operating system.
Good Luck!
Need instructions for use
Hi,
If you have the install CD the manual is on the system already ..
http://support.lexmark.com/index?page=content&id=RE89&actp=search&viewlocale=en_US&userlocale=EN_AU&segment=SUPPORT&productCode=LEXMARK_Z640&searchid=1264433694394
I had a look about and could not find a manual online
Hope this helps?
Despite the Color Ink level
Generally the cause of your problem is a blockage within the cartridge. Get a new cartridge and your problem will be solved.
I have got windows 7 on my pc,installed my lexmark
Check you Device Manager and see if you see anything yellow ie ? question mark or ! exclamation. That will tell you if you need to download drivers.
(if it has, you need to download the drivers.)
Good Luck
My computer uses Windows Vista My lexmark z640
Paul,
FRom Control panel->Add Remove programs delete the printer after disconnecting it from the PC. Now reboot the PC and install the drivers again. Reboot again and then connect the printer and allow windows to detect the printer and load its drivers. It will give you a message in the right bottom corner of the screen saying "The new HW has been installed and is working". Now run the word processor and from FIle->print select this printer as the default printer.
Now it will wor properly.
I CAN'T LOCATE THE ELECTRICAL PORT FOR THE Z640
Hello,
The 600 series takes a separate power supply that plugs into the back of the printer.
Refer to this Setup Guide:
Lexmark 600 Series Setup
See step 1.
These may or may not be available. Google
Lexmark Power Supply and you may get some hits for some internet sites that carry it.
Thanks for using Fixya.
Lexmark Z640 Printer only prints to 99% and then stops
Go to start menu, open printer and faxes option. Right click your printer icon and open properties. Click on the port tab and verify that Enable bidirectional support is selected. If not click on it to check it. Click on OK and it shd work..
Not finding what you are looking for?