LG RH177 DVD Recorder/HDD Recorder - Answered Questions & Fixed issues
My DVD recorder LG RH1858 isn't recording
Unfortunately, your recorder is picking up a signal in the broadcast that copy-protects the show. The recorder is programmed to forbid copying of protected material. Depending on the source of the copy-protection, you may be able to block out the copy protection signal with a hardware filter. One example of these would be the Sima CT-2 that is placed between the S-out of the receiver and the S-in of the recorder.
I hope this helps.
Cindy Wells
(One common sources with this issue: a DVR that passes on the copy protection to an attached DVD recorder. Particularly some of the new Satellite/Cable receivers with built-in DVRs. The non-DVR models of the products usually filter out the copy-protection.)
3/4/2020 5:43:34 AM •
LG RH177 DVD...
•
Answered
on Mar 04, 2020
•
1,092 views
I can't play MPEG-4
Refer to its user manuals' specification sheet. You can see all details about the formats that this player can read.
4/15/2019 7:00:49 AM •
LG RH177 DVD...
•
Answered
on Apr 15, 2019
•
266 views
I have a LG DVD
unplug the hard drive inside and see if it boots. if it does then the hard drive needs fixing or replacing.
2/25/2018 6:39:10 AM •
LG RH177 DVD...
•
Answered
on Feb 25, 2018
•
461 views
My RHT497H unit only responds
Get in touch with where you bought it from. They should be able to sort it out. It sounds to me that it could be faulty.
3/26/2017 11:47:50 PM •
LG RH177 DVD...
•
Answered
on Mar 26, 2017
•
150 views
I have an LG RH387 that stays on the 'hello' message.
You will need to remove the cover and inspect the capaciters, look for the cap/s that have expanded on the cap.and replace, If your not too happy at soldering look on YouTube for guidence, Make sure the larger capacitor are discharged with mains supply unpluged.
1/10/2013 11:38:51 PM •
LG RH177 DVD...
•
Answered
on Jan 10, 2013
•
693 views
LG RH387 stays on hello message
Hi All I have just had this problem. Note that the DVD reader/writer has packed up and the system will not boot any futher. Replace the DVD/reader/writer and your problem will be resolved
9/27/2018 9:08:05 AM •
LG RH177 DVD...
•
Answered
on Sep 27, 2018
•
5,734 views
My lg hd dvd recorder just keeps saying hello when
Possible that the mainboard is not working as there are errors within which it does not proceed to switch on.The processor needs to be checked and confirmed if this is working, check for heating of any particular IC's as this must be probed. also check the loading drive.
10/3/2011 9:57:21 AM •
LG RH177 DVD...
•
Answered
on Oct 03, 2011
•
868 views
Not finding what you are looking for?