Jenn-Air JED8230 Electric Cooktop - Answered Questions & Fixed issues


if it has slightly raised sides or a fat drain
let it heart up and then used water on the hot surface to steam loosen the crud
you could put a bit of washing up detergent in the water ( just a few drops )to assist in breaking down the surface tension and release any grease
The same as cleaning a BBQ plate before using it

Jenn-Air JED8230... | Answered on Nov 18, 2017 | 74 views


possibly the Jenn AIre website . http://www.erepairparts.com/

Jenn-Air JED8230... | Answered on Oct 14, 2017 | 175 views


Be sure the control is set to F* and not C*.

always unplug electricity before attempting to repair on any electrical appliance

Jenn-Air JED8230... | Answered on Oct 02, 2017 | 218 views


You have a short that trips the beaker .I would try a fan switch first .

Jenn-Air JED8230... | Answered on Aug 07, 2017 | 233 views


read you owner manual , and read any instruction. if does not have it
download from www.fitness.manualsonline. com and proceed according
God bless you

Jenn-Air JED8230... | Answered on Sep 25, 2012 | 116 views


it sounds like you will need to replace the fan motor

Jenn-Air JED8230... | Answered on Dec 18, 2011 | 128 views


Hello Gary,
Their is one of two things wrong why your surface burners are not working.
1) the block that the burners plug into it bad...it is very common for the burner block to be worn down and making very poor contact with the burners and thus their is power at the blocks and yet the burners will not work
2) the burners their self are bad

GENE

Jenn-Air JED8230... | Answered on Nov 03, 2011 | 453 views


Call 1-800-JennAir and they can assist.

Jenn-Air JED8230... | Answered on Oct 11, 2011 | 94 views


It can be short in control board.The weak components on the board gets shot.Actually as you mentioned that circuit breaker tripped.When the components gets weak and board cannot handle the flow of current, at that time it trips the breaker, so that components don't get shorted.But if still the circuit breakers is turned on, then in some cases the breaker trips again or in some cases the weak components on the main control board gets popped out and unit quits working.------- As per the problem mentioned the main control board has top be replaced. But still get the voltage checked at the board.This will help.----------

You can get required parts from online sites like: --- www.repairclinic.com or from searspartsdirect online site.

----------- This should help. Thanks.Helpmech.

Jenn-Air JED8230... | Answered on Jul 06, 2011 | 89 views


From your cook top, there are 4 wires. BLACK, RED,GREEN and WHITE.Out of that GREEN is ground and WHITE is neutral.The BLACK and RED are positive and negative wires.-------------Connect it as follows:--- Black from cook top to black on house wire.-------- Red from cook top to white on house wire.( don't connect red or black from cook top to bare copper wire). ------------ Now white from cook top to bare copper wire at house plug. ----------- The green wire is your ground wire and it just connects to a screw going into the frame of the cooktop.
It should be grounded to the metal frame on cooktop.
-----------------
You can also connect this way:--- cooktop black to the wall black, the cooktop red to the wall white , and the cooktop white and green to the wall bare.---
Join both green and white wire of cooktop together to its ends, then connect that to wall bare wire.--------
This will help.-----------Many uses face this problem for wire connection.So this combination connecting of wire helps.------ The other option is to change the wall receptacle, there are 4 wire receptacle available at home-depot and Walmart stores.It costs approx $15 for this 4 wire wall receptacle and any local electrician will get this connected for you, with his basic charge.------- This will help.Thanks.Helpmech.

Jenn-Air JED8230... | Answered on Jun 14, 2011 | 343 views


No the red is a hot wire, thats why you do not have full power. Check this link it shows the correct wiring Replacing an oven cord

Jenn-Air JED8230... | Answered on Mar 31, 2011 | 166 views


Hi,
No, hook the stove black and red to the house black...
white to white and green to green...

heatman101

Jenn-Air JED8230... | Answered on Mar 20, 2011 | 427 views


Wiring is wrong. Front burner knob is connected to back burner.

Jenn-Air JED8230... | Answered on Feb 03, 2011 | 84 views


get a gas repairer to check for you or you go back to where u bought it and the burners will be replaced or sold to you if the cooktop is still under one year warranty

Jenn-Air JED8230... | Answered on Jan 19, 2011 | 159 views


White is neutral,green is ground,red is L2 and black is L1.See the wiring below:--- helpmech_4.png
--------------------- If the diagram is very small and you want to see bigger view of it.Then click on the link below:--- http://www.searspartsdirect.com/partsdirect/partsdirect/showSubComp.pd?imageUrl=http://c.searspartsdirect.com/lis_png/PLDM/M0504306-00001.png ---------------- This should help.Thanks.Helpmech.

Jenn-Air JED8230... | Answered on Jan 19, 2011 | 583 views


you can get one at tvpartsandmanuals. com they have tv and appliance parts

Jenn-Air JED8230... | Answered on Jan 06, 2011 | 231 views


I put a tea towel over the vent surface, also a piece of bubble wrap does the trick if used as insulation, and both can be removed quickly to use the surface.

Jenn-Air JED8230... | Answered on Jan 04, 2011 | 133 views


Sorry to read about your problem, I hope this helps you out.

you have a stuck downdraft switch..

I tried to help you. Please help me and Rate/Vote on my response, thanks and good luck

Jenn-Air JED8230... | Answered on Dec 23, 2010 | 130 views


Sorry to read about your problem, I hope this helps you out.

yes it is..sounds like the whole unit needs a cleaning..but i am concerned why you motor has problems the next day..it just might be defective.they are sealed bearing units, and should not be oiled..

I tried to help you. Please help me and Rate/Vote on my response, thanks and good luck

Jenn-Air JED8230... | Answered on Dec 23, 2010 | 259 views

Not finding what you are looking for?
Jenn-Air JED8230 Electric Cooktop Logo

175 questions posted

Ask a Question

Usually answered in minutes!

Top Jenn-Air Cooktops Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

MARLON KELLER

Level 2 Expert

111 Answers

Paul Carew

Level 3 Expert

3480 Answers

Are you a Jenn-Air Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...